Whirlpool ADP 750 manual Filtering System, Filter assembly

Filtering System

The filter prevents larger remnants of food or other objects from getting inside the pum. The residues may block the filter, in this case they must be removed.

The filter system consists of a coarse filter,a flat (Main filter)

And a microfilter(Fine filter).

2	Main filter	1
	Food and soil particles trapped in this filter are pulverized by a

special jet on the lower spray arm and washed down to drain.

1

3

Coarse filter 2

Larger items, such as pieces of bones or glass, that could block the drain are trapped in the coarse filter. To remove the items caught by the filter, gently squeeze the tap on the top of this filter and lift out.

Fine filter 3

This filter holds soil and food residues in the sump area and prevents it from being redeposit on the dishes during wash cycle.

Filter assembly

The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle. For best performance and results, the filter must be cleaned regularly. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter and cup under running water. To remove the filter device, pull the cup handle in the upward direction.

WARNING!	The dishwasher must never be used without the filters.
	Improper replacement of the filter may reduce the performance level of the appliance
	and damage dishes and utensils.

Step 1：Turn the filter in anti-clockwise direction, then lift it up.

Step 2：lift the Main filter up

Step 3： lift the Fine filter up

When following this procedure from step1 to step 3, the filter system will be removed;

when following it from Step 3 to Step 1, the filter system will be installed.

14