Filteringandtreatingwater

Cleaning and Caring

Continued

6. Remove the water distributor from the freezing plate. It is held in place by rubber end caps. Remove the inlet hose and clean all water distributor holes and the small orifice in the inlet side of the distributor. When replacing the distributor, make sure the end caps are located in the evaporator flange detents and that the water distributor holes face down.

7. Wash the interior components (ice retainer baffle, cutter grid, water pan, inlet hose and water distributor) and the storage bin, door gasket and ice scoop with mild soap or detergent and warm water. Rinse in clean water. These components should also be cleaned in a solution of 1 oz.

(29.6 mL) of chlorine bleach in 1 gallon

(3.8 L) warm water. Rinse again thoroughly in clean water.

8. Replace the interior components: water

distributor, inlet hose and water pan.

9. Check the following:

l Hose from water valve is in water pan.

. Rubber drain plug is in water pan.

l Water distributor is seated and holes are facing down.

. Hose is reconnected to pump and water distributor.

l Hose from water pan is inserted into storage bin drain opening.

10. Reconnect electrical harness, slide cutter grid into place and tighten the thumb screws. Replace the ice retainer baffle.

11. Turn Cycle Control Knob to “ON.”

In most areas it will be beneficial to filter or treat the water being supplied to the ice machine. It can improve the reliability of the machine, reduce water system maintenance and produce the best quality of ice.

The installation of a polyphosphate feeder will generally reduce scale build-up and the ice machine will require less frequent cleaning.

Municipal water systems are generally treated with chlorine to maintain a safe drinkable water supply. Activated carbon filters will sufficiently remove the residual chlorine from the water to reduce surface staining of stainless steel materials in the ice machine.

For more information on filtering and treating the water, see the dealer from whom you purchased your ice maker or your authorized WhirlpooP service company.

EC510 specifications

The Whirlpool EC510 is a standout water cooler that combines modern technology, efficiency, and user-friendly features. It is designed to cater to both home and office environments, providing an efficient solution for hot and cold water needs. As consumers increasingly seek convenience and quality in appliances, the EC510 excels in delivering a well-rounded performance.

One of the main features of the Whirlpool EC510 is its dual-temperature capability. The unit provides both hot and cold water options, making it versatile for various uses. Whether you need boiling water for tea or cold water for hydration, the EC510 can accommodate your needs with ease. The hot water temperature can reach up to 194°F, suitable for instant beverages or cooking, while the cold water temperature goes down to approximately 50°F for a refreshing drink.

The EC510 is equipped with an energy-efficient design. It uses advanced insulation technology to maintain water temperatures without excessive energy consumption. This not only helps in reducing electricity bills but also contributes to a more sustainable environment. The energy-saving features include an on/off switch for the hot water function, allowing users to save energy when hot water is not necessary.

Another impressive characteristic of the Whirlpool EC510 is its user-friendly interface. The model features easy-to-use push-button controls located at the top of the unit, ensuring accessibility for users of all ages. The LED indicator lights signal when the water is hot or cold, enhancing the user experience by providing a visual cue.

Moreover, hygiene is a significant focus for the Whirlpool EC510. The unit incorporates a removable drip tray, making it easy to clean and maintain. It also features a built-in filtration system that helps to ensure the purity of the water dispensed, which is critical for health-conscious users.

With a sleek design, the Whirlpool EC510 is aesthetically pleasing, fitting seamlessly into various décor styles. Its compact size makes it suitable for any kitchen or office setup without taking up too much space.

In summary, the Whirlpool EC510 stands out as a multifunctional water cooler that offers convenience and efficiency. Its dual-temperature features, energy efficiency, user-friendly controls, and hygienic design make it a compelling choice for anyone in need of a reliable water solution. Whether for personal use or in a shared environment, the EC510 delivers on performance and practicality.