QSC Audio 722az manual Getting Started

Page 14

Getting Started (continued)

17- Select Device, Add New Device, from the menu. A new window will open prompting you to name the device. Name it logically, such as BASIS 1, or similar. Select the Device Type and select BASIS 722az. At the Password prompt, enter “qsc” (lower case, no quo- tation marks). This is the device password, separate from the software password. The default, in both cases, is “qsc”, but you are free to change either or both. Enter the IP address of the BASIS and click OK.

18- The BASIS will now appear in the inventory root (left side of screen). If the BASIS does not show in the inventory root, check that a crossover cable is used (only for BASIS connected directly to PC), check the cable connections, verify IP addresses are set correctly, ver- ify Subnet masks are set correctly, and verify AC power is properly applied to the BASIS.

19- Click on the BASIS 722az in the inventory root. A view of applicable device tabs will open. Click the DSP tab and the current DSP configuration of the BASIS will be displayed.

20- Right click on the Design Editor icon in the lower left of your display; select “New”. A new window opens; select BASIS 722az for the device type.

21- Click on Help to access the software’s Help system. All software operation is covered in the on-line help file.

Operation of the BASIS 722az is accomplished with the included QSControl.net software. No soft- ware operation is covered in this hardware manual. After installing your software, open the Help file and follow its recommendations. The software Help file includes the most recent information avail- able for your BASIS 722az.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 8x8 Control and Monitoring Signal Processor Hardware Manual TD-000145-00Important Safety Precautions & Explanation of Symbols Introduction Block Diagram Introduction Networking the Basis 722az Example 1- QSControl.net X-over mode Example 2- Unmanaged SwitchQSControl Port Basis 722az CAT-5 Cable Example 3- Managed Switch configured with multiple VlansManaged Switch CAT-5 Cable Non-QSControl Data QSControl.netRack Mounting UnpackingMounting DescriptionComputer Requirements & Software Installation General Information & Configuration MemoriesConnections RS-232 LED IndicatorsMonitor Chain PortsFront Panel Password Lockout LCD Display and ControlsLCD Navigation Map typical Dependent functionsReboot only if your computer prompts you to do so Getting StartedGetting Started Operation Utility/Diagnostic FunctionsSafe Mode Switch QSControl PortRS-232 Communications Procedure Telnet Access Preliminary Specification Monitor Output RS-232 Port QSControl IndicatorsMonitor Input Monitor LevelHow to Contact QSC Audio Products QSC Audio Products 3 Year Limited Warranty
Related manuals
Manual 2 pages 22.02 Kb

722az specifications

The QSC Audio 722az represents a significant advancement in the realm of high-performance audio solutions, designed specifically for applications that demand both versatility and reliability. As part of QSC's acclaimed array of products, the 722az combines state-of-the-art technologies with user-friendly features, making it an ideal choice for professional audio engineers and sound system designers.

At the heart of the 722az is its high-output capability, which provides robust audio performance suitable for various environments, from concerts to corporate events. The system boasts an impressive power rating, ensuring that it can handle large venues without compromising sound quality. With an emphasis on clarity, the 722az delivers a wide frequency response, allowing for a full-bodied audio experience that captures the nuances of every performance.

One of the standout features of the QSC Audio 722az is its advanced DSP processing. The built-in digital signal processing technology enables precise control over audio parameters, including equalization, crossover settings, and dynamic range management. This level of customization allows sound engineers to fine-tune the audio output to suit specific acoustics and audience needs, ensuring optimal sound quality in every situation.

Additionally, the 722az incorporates QSC's proprietary Amplified Loudspeaker Processing (ALP), which enhances the overall efficiency and performance of the system. ALP includes features such as speaker protection algorithms designed to prevent damage from excessive levels and thermal overload, ensuring durability and longevity in demanding environments.

Connectivity is another strong point for the 722az. It offers various input options, including analog and digital formats, catering to a wide range of equipment and setups. The unit's compatibility with QSC's Control Manager software allows users to monitor and manage multiple devices seamlessly, enhancing workflow and operational efficiency.

Ergonomically designed for portability, the QSC 722az features a lightweight yet sturdy construction, making it easy to transport and set up. Its rugged build is perfect for the rigors of touring and live events, ensuring that it can withstand the challenges of different venues.

In summary, the QSC Audio 722az is a powerful and versatile loudspeaker that combines advanced technologies, including robust DSP processing and Amplified Loudspeaker Processing, with user-centric features. Its superior audio performance, coupled with reliable connectivity and durability, makes it an exemplary choice for anyone looking to elevate their sound experience in various professional audio settings.
Top Page Image Contents