D13. Plug in Your Refrigerator | Whirlpool ECKMF-28 specs

Dl. Find a %-inch to l-inch vertical COLD water pipe near the refrigerator. (Horizontal pipe will work

but extra precaubons must be taken.)

D2. Measure from inlet on rear of refrigerator to water pipe. Add 7 feet to allow for moving re- frigerator for cleaning. This is the length of X- inch O.D. copper tubing you will need for the job (length from inlet tube to water pipe PLUS 7 feet). Be sure both ends of copper tubing are cut square.

D3. Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

04.Using a grounded drill, drill a %-inch hole in the vertical cold water pipe you have selected. Some water almost always remains in pipes. If it enters the drill, it can cause lethal shock. BE SURE YOUR DRILL IS GROUNDED.

Fasten a separate ground wire from drill to a good ground that complies to local electrical codes. (If in doubt, consult a licensed electri- cian.) UNLESS PROPER GROUNDING IS FOL-

LOWED, YOU ARE NOT PROTECTED AGAINST SEVERE OR LETHAL SHOCK.

If you must use a horizontal pipe, take extra precautions:

Drill on the top or side of the pipe, not bottom. This helps keep water away from the drill. Also, it keeps normal sediment from collecting in the valve.

D5. Fasten shutoff valve to cold water pipe with pipe clamp. Be sure inlet end is solidly in the %6-inch drilled hole in the water pipe and that washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight connection.

Do not overtighten or you may crush copper tubing, especially if soft copper tubing is used. Now you are ready to connect the copper tubing.

WASHER

PIPE CLAMP

INLET

END

RTICAL

D WATER

PIPE

D6. Slip compression nut and compression sleeve on copper tubing as shown in diagram. Insert end of tubing into outlet end squarely as far as it will go. Screw compression nut to outlet end with adjustable wrench. Do not overtighten. Turn ON main water supply and fl’ush out tubing until water is clear. Turn OFF shutoff valve on the water pipe. You are now ready to connect other end of %-inch copper tubing to inlet tube or water valve on back of refrigerator.

SHUTOFF

OUTLET END

07.Assemble compression nuts on tubing as shown in diagram. Insert ends of tubing into connector and tighten compression nuts. Be sure ends of tubing are squarely in connector as far as they will go. Do not overtighten.

%” TUBE TO SHUTOFF VALVE

SLEEVE ~

kNUT-

CONNECTOR

SLEEVE

NUT

UNION

INLET TUBE TO REFRIGERATOR

08.Turn shutoff valve on. TIGHTEN ANY CONNEC-

TIONS OR NUTS THAT LEAK.

D9. REPLACE LOWER BACK COVER PREVIOUSLY REMOVED.

010.Copper tubing may now be fastened to base- board.

Dll. The Ice Maker is equipped with a built-in water strainer located on the inlet side of the water valve. If local water conditions require periodic cleaning or a well is your source of water supply, a second water strainer should be installed In the X-inch water line.

012.Water Pressure Limitations: Not below (15 P.S.I.) or above (125 P.S.I.). If a problem occurs call your Utility Company.

D13. PLUG IN YOUR REFRIGERATOR.

When you have your first batch of ice you may throw away extra parts.

IMPORTANT:

It may take up to 24 hours for your Ice Maker to begin producing ice crescents.

To enjoy your Ice Maker most

PLEASE READ CAREFULLY THE ICE MAKER SECTION OF YOUR USE AND CARE GUIDE.

ECKMF-28 specifications

The Whirlpool ECKMF-28 is a compact and efficient ice cream maker that brings the joy of homemade frozen desserts to your kitchen. Designed for ease of use and maximum convenience, this innovative appliance is perfect for families and individuals who want to create delicious ice cream, sorbets, and frozen yogurt in the comfort of their own home.

One of the standout features of the ECKMF-28 is its automatic mixing function. This built-in technology ensures that the ingredients are consistently mixed, allowing for a creamy texture without the need for manual stirring. Simply add your chosen ingredients, select your desired consistency, and let the machine do the rest. With its efficient mixing mechanism, users can achieve a soft-serve consistency within just 20 minutes.

Another noteworthy characteristic is the machine's capacity. The ECKMF-28 can produce up to 1.5 quarts of ice cream, making it suitable for larger gatherings or family treats. This generous capacity allows users to experiment with different flavors in one go, ensuring there’s always a delicious option available for everyone.

The ECKMF-28 is equipped with a user-friendly interface, featuring easy-to-read controls that allow for simple operation. The transparent lid ensures that you can monitor the mixing process without interrupting it, while the built-in handle makes it easy to transport and store.

In terms of design, the whirlpool ice cream maker boasts a sleek and modern aesthetic that fits seamlessly into any kitchen décor. Made of durable materials, it is built to withstand frequent use while maintaining its stylish appearance.

Cleaning the ECKMF-28 is hassle-free thanks to its removable parts, which are dishwasher safe. This feature not only saves time but also ensures that the appliance remains hygienic for future use.

In summary, the Whirlpool ECKMF-28 is a versatile and efficient ice cream maker that combines modern technology with user-friendly features. With its automatic mixing function, generous capacity, and easy-to-use design, it is the perfect addition to any kitchen for those who love indulging in homemade frozen treats. Whether for a family gathering or a quiet night in, the ECKMF-28 makes creating artisan-style ice cream an accessible and enjoyable experience.