Whirlpool WU1000XO warranty Using Your Dishwasher, Before starting dishwasher, Starting dishwasher

Using Your Dishwasher

Silverware		basket		Spray		tower
					protector
Bottom	rack		Filter system			screen
			II/	(not shown)
Water inlet		opening		Lower	spray arm
Heating	elemen
				Overfill	protector
			tergent		dispenser
			-	Access		panel
			-Door		color	panel
		\		Model	and	serial
				number		label
		Rinse	agent dispenser	(on right		side)

Before starting dishwasher

1. Read “Important Safety Instructions” on page 2 before starting your dishwasher.

2.Properly load the top and bottom racks, and silverware basket. (See page 4.)

3.Spin the lower spray arm to make sure nothing will stop it from turning freely.

4.Add detergent. See page 5.

5.Check rinse agent dispenser. See page 5.

6.Push door firmly when closing and it will automatically latch.

7.Run hot water at sink nearest dishwasher until it is hot. Turn it off.

Starting dishwasher

1.Select a drying option.

2.Turn the Cycle Control Knob clockwise to point to WASH. The dishwasher will automatically start the cycle.

Cycle and options

Wash cycle

A double wash for moderate to heavily soiled loads

Select the mark next to WASH with the Cycle Control Knob. The cycle sequence will be:

Wash p Rmse b Rinse bWash b Rinse b Rinse p&me ~Dry Hoff

Option selector button

Dry Select options

If the HEATED DRYING Option Selector Button is pushed, air m the dishwasher IS heated during the “dry” part of the cycle.

For best drying results, use a liquid rinse agent.

Cycle control knob

If the ENERGY SAVER Option Selector Button is pushed, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spottmg may result. Some items (such as plastics) may need towel drying.

For best drying results, use a liquid rinse agent.

Page 3