Whirlpool 8700 Series manual CommonDishwashingProblems, Improper loading

Page 18

CommonDishwashingProblems

Spotting and filming Hard water

Fill detergent dispensers to capacity. Use dishwasher detergent with highest available phosphorus content. May be necessary to install water softener.

To remove spots and film, try a vinegar rinse..

1.Wash and rinse load as usual. Use Air Dry Option.

2.Remove all metal items,

3.Put 2 cups (500 mL) white vinegar in a container on the bottom rack.

4.Run dishwasher through a complete washing cycle.

Water is not hot enough

Water temperature should be at least 140°F (60%). Set water heater thermostat to a higher setting. Run water at sink until hot before starting and do not use Lo-Energy Option.

Not enough detergent, or improper detergent

Use more dishwasher detergent. Use detergent with highest available phosphorus con tent. especially with hard water.

“Old” detergent

Use only fresh dishwasher detergent. Store tightly closed container, in cool, dry place. Discard old detergent. Do not fill dispensers until ready to start dishwasher.

Improper loading

Make sure dishes and glassware are loaded so spray reaches all surfaces and items drain properly. Do not overload. Do not nest items.

Make sure large items do not block spray from reaching detergent dispensers.

No rinse agent

Does the rinse agent dispenser need filling? See instructions on page 13.

AIR DRY Setting used

Drying without heat may result in some spotting of glasses and silver,

Small particles deposited on items Spray arm not rotating freely

Check spray arms to make sure they turn freely after loading. Be sure a utensrl has not prevented their turning.

“Old” detergent

Use only fresh dishwasher detergent. Store tightly closed container, in cool, dry place. Discard old detergent. Do not fill dispensers until ready to start dishwasher.

Not enough detergent, or improper detergent

Use more dishwasher detergent. Use detergent wrth highest available phosphorus content...

especially with hard water.

Water is not hot enough

Water temperature should be at least 140°F (60%). Set water heater thermostat to a higher setting. Run water at sink until hot before starting and do not use Lo-Energy Option.

Water pressure may be low, dishwasher is not filling properly

If water pressure is low, do not use water for other purposes while dishwasher is running (to assure correct fills).

Dishes not dry No rinse agent

Does the rinse agent dispenser need filling? See instructions on page 13.

Water!s not hot enough

Water temperature should be at least 140°F (60°C). Set water heater thermostat to a higher setting. Run water at sink until hot before starting and use Hi-Temp Rinse Option.

Improper loading

Make sure dashes and glassware are loaded so spray reaches all surfaces and items drain properly. Do not overload. Do not nest items.

AIR DRY Setting used

Allow more time when using Air Dry Option, or use Heat Dry Option. Plastic items may need towel drying.

Black marks on dishes

Aluminum utensils rubbing against items during washing

Use care in loading aluminum utensils,

especially any lightweight foil container. Place so they do not touch dishes. Remove black marks witti plastic scouring pad and a mild abrasive cleanser.

Chipping or breaking glassware Improper loading

Do not overload. Load glasses in the top rack only. Load between prongs;not over them. Glasses loaded over prongs will not be supported and may chrp or break

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Use&CareGuide TKiklContents ImportantSafetyInstructions OperatingInstructionsBeforestartingyour dishwasher Startingyour dishwasher Toadd a dish after startingTheclean signal light Changinga cycle settingUsingdelay wash Changingan optionWhathappensin eachcycle Operating InstructionsNormal Wash Cycle Whathappensin eachoption Operating Instructions Rinse & Hold CycleWater heating ProperLoading Lower Page AddingDetergent CoverUsingRinseAgentDispenser ConnectingA PortableDishwasher Power supply cord Prong Grounding type Wall Receptacle Prong Power Supply 120 volts, 60Hz AC, 15 or Grounding AmpsEquipped with a power supply cord having a Service company. Instructions are included withLoad dishes so they don’t touch one another SpecialtipsHot water is a must Read these special tips for the following itemsPage CommonDishwashingProblems Improper loadingUndissolved detergent coming in Contact with flatware IfYouNeedServiceOrAssistance Wesuggestyou follow thesestepsIf you need service If you need FSP@ replacement partsWASHINGMACHINESDRlERS 6IRONERS- SERlClNG Page Power CLEAN’ washing system parts covered by your warranty SprayCompany Repair Labor lo correct defects FromPurchase Second Year From Date of Purchase

8700 Series specifications

The Whirlpool 8700 Series represents a pinnacle in home appliance innovation, delivering both style and functionality for today’s discerning homeowner. Renowned for its reliability and performance, this series includes appliances like washers and dryers that cater to the varied needs of modern families.

One of the standout features of the Whirlpool 8700 Series is its Adaptive Wash Technology. This cutting-edge technology uses sensors to evaluate load size and fabric type, optimizing the wash cycle for the best clean possible while minimizing water and energy consumption. This not only ensures that garments are treated with care but also contributes to more efficient resource usage, making it an eco-friendly choice for households.

Another significant advantage of the Whirlpool 8700 Series is its option for EcoBoost, which allows for enhanced energy savings. This feature utilizes a combination of water temperature adjustment and cycle optimization to reduce overall energy consumption. Users can enjoy a thorough cleaning experience without the guilt of a high utility bill.

The washers in this series also include the Precision Dispense feature, which automatically releases detergent, bleach, and fabric softener at the right time during the wash cycle. This ensures that each item receives the correct amount of cleaning solution, enhancing cleaning effectiveness while preserving fabric quality.

Dryers in the series come equipped with Advanced Moisture Sensing technology. This feature monitors the drying process to prevent over-drying, ensuring clothes are dried just right. The result is reduced wear and tear on fabrics, extending the life of clothing. Additionally, the Wrinkle Shield option helps to prevent wrinkles by tumbling clothes intermittently after the cycle ends.

Style and design are not overlooked in the Whirlpool 8700 Series. With a sleek, modern look and an intuitive control panel, these appliances fit seamlessly into contemporary home aesthetics. Available in a variety of finishes, they are designed to meet not only functional needs but also to enhance the kitchen or laundry room’s visual appeal.

In summary, the Whirlpool 8700 Series combines advanced technology with user-friendly features, ensuring durability and performance. With its focus on efficiency and versatility, this series stands as a robust solution for any household looking to elevate their laundry experience. Whether it’s through innovative wash cycles or energy-saving options, Whirlpool continues to set the standard for home appliances.
Top Page Image Contents