Starting Your Dishwasher

This section tells you how to start or stop your dishwasher. Refer to it for quick reference.

Starting a wash cycle

1.Load the dishwasher. See pages 7-9.

. -

y amt. ftshould turn freely.

gent. See page 10.

agent, if needed. See page 11.

5.Close door firmly until il latches.

6.Run hot water at the sink nearest the dishwasher until water is hot. Turn water off. (See page 20.)

7. Select a drying option. (See page 13.)

er	For models with	buttons, the
--	indicator above the button will
	indicator above the button will
	show red when the option has
	been selected.	For models

El	with	rocker	switches, the
switch	indites	which	option has been
selected.
F’	NOTE: Select AIR DRY for
F’	the RINSE 8 HOLD cycle. For
E’	the RINSE 8 HOLD cycle. For
E’	Series 640 models, push a
	Cycle button for the desired
l5l	cycle. NORMAL WASH,

LIGHT WASH, and RINSE 8 HOLD cychs share the same button. The Cycle Control Knob determines which cycle operates. For Serifs 630 models, the HEAT DRY option is automatically s&dad with the POTS & PANS cycle.

6.Turn the Cycle Control Knob clockwise to the desired cycle. You will feel a definite “stop” at each cycle mark. The dishwasher automatically starts the cycle you select.

NOTE: lf the door is latched, you will hear the cycles start and stop as the control knob passes each cycle mark. Thii is normal and does not hurl the dishwasher. If you prefer, you can set the Cycle Control Knob with the door unlatched.

Stopping the dishwasher

You can stop your dishwasher anytime during a cycle. All you have to do is:

l Open the door slightfy. Wait for any filling or spraying action to stop before opening the door all the way. Close the door to continue the cycle.

l Turn the Cycle Control Knob slowly cfockwiie until you hear water draining. Let the dishwasher drain completely. Then open the door and turn the Cycle Control Knob to OFF.