To change door color panel.
(For models so equipped)
Personal Injury Hazard
Handle metal edges of panels carefully. Cut metal edges may cause personal injury or damage to other materials.
1 Lift up at each end of the trim n piece at bottom of door
panel and then pull trim piece toward you. Set trim piece aside
2 Use both hands to bow door n panel and remove panel
from door,
2 Bow panel with
u n desired color facing
out and insert into door trim. Slide top of panel and spacer under top edge of upper door trim.
4.
Hold door panel and spacer up. Insert trim piece and push down until it snaps in place. Slide door panel down.
To change access color panel .-
(For models so equipped)
1 Push up with thumbs near w each end of the access
panel top trim to unsnap the front of trim. Remove the top trim and set it aside.
II
2. Hold the top of the color panel and bow it slightly.
Slide color panel upwards and remove.
Bow panel with desired color w facing out and insert into
grooves on sides of access panel frame. Slide color panel downward into groove along bottom of access panel frame.
‘4 | Insert the tabs of the top |
w trim into the slots in the |
access panel frame. Snap the front of the top trim down to cover the top edge of the color panel.