Whirlpool RM235PXK warranty Adjusting the Oven Temperature Control, Offoffoff

Lift rack at front and pull out

Set the Oven Selector on BAKE.

Put food in the oven. Oven

rock, walls and door will be hot

Put the rack(s) where you want them before turning on the oven.

Rack(s) should be placed so food can be centered in

the oven. Always leave at least 1% to 2 inches (4-5 Cm] between the sides of the pan and the oven walls and pans. For more information, see the

“Cooking Guide.”

3

Set the Oven Temperature Control to the baking

temperature you want. 6

During baking, the elements will turn on and off to help keep the oven temperature

at the setting. The Signal Light will turn on and off with the elements.

The top element helps heat during baking, but does not turn red.

4

Let the oven preheat until the Signal Light goes off.

7

When baking is done, turn both knobs to OFF.

ADJUSTING THE OVEN TEMPERATURE CONTROL

Does your new oven seem to be hotter or colder at the same settings than your

old oven? The temperature setting in your old oven may have changed gradu- ally overthe years. The accurate setting of your new oven can seem different.

If you think the oven temperature needs adjusting, follow these steps:

OFFOFFOFF

1. Pullmout the center of the Oven Tem- perature Control.

Locking Screw

2.Loosen the lock- ing screw.

Tooth		Notches	Tooth			Notches
3. To lower		the tem-	4. To raise		the		tem-
perature,		move	perature,			move black
black	ring so tooth is		ring	so	tooth		is
closer	to	LO. Each	closer		to	HI. Each
notch	equals		notch	equals
about	10 F (5 C].		about		10 F (5 C).

lighten the locking screw. Replace the knob.

12