Whirlpool W10182518A manual Troubleshooting, Replacement Parts, Accesssories and Cleaning Supplies

Page 6

Replacing Filters and Light Bulbs

NOTE: A filter status indicator (on some models) appears in the display when it is time to replace the charcoal filter, and clean or replace the grease filter. See “Settings” section to reset filter status.

Grease filter: Remove grease filter from underside of microwave oven, and clean monthly, or as prompted by filter status indicator.

Charcoal filter: The charcoal filter is behind the vent grille at the top front of the microwave oven. The charcoal filter cannot be cleaned, and should be replaced about every 6 months, or as prompted by filter status indicator.

Cooktop light(s): The cooktop light(s) is(are) located on the underside of the microwave oven, and is(are) replaceable.

Cavity light: The cavity light bulb is located behind the vent grille at the top front of the microwave oven, under the bulb cover, and is replaceable.

Troubleshooting

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

www.whirlpool.com

Microwave oven will not operate

Check the following:

Household fuse or circuit breaker

If a household fuse has blown or a circuit breaker has tripped, replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Magnetron

Try to heat 1 cup (250 mL) of cold water for 2 minutes at 100% cooking power. If water does not heat, try the steps below. If microwave oven still does not operate, call for service.

Door

Firmly close door. On some models, if a packaging spacer is attached to inside of the door, remove it, then firmly close door.

If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started. This happens to avoid unintended starting of the microwave oven. Open and close the door, then start the cycle.

Control

Make sure control is set properly. Make sure Control Lock is off. Make sure Demo Mode (on some models) is off.

Arcing in the microwave oven

Check the following:

Soil buildup

Soil buildup on cavity walls, microwave inlet cover, cooking rack supports, and area where the door touches the frame can cause arcing. See “General Cleaning” in “Microwave Oven Care” section.

Turntable alternates rotation directions

This is normal and depends on motor rotation at the beginning of the cycle.

Display shows messages

A flashing “:” or “PF” means there has been a power failure. Reset the clock.

A letter followed by a number is an error indicator. Call for assistance.

Radio, TV or cordless phone interference

Check the following:

Proximity

Move the receiver away from the microwave oven, or adjust the radio or TV antenna.

Soil

Make sure the microwave oven door and sealing surfaces are clean.

Frequency

Some 2.4 GHz-based cordless phones and home wireless networks may experience static or noise while microwave oven is on. Use a corded phone, a different frequency cordless phone or avoid using these items during microwave oven operation.

Fan running during cooktop usage

This is normal. The microwave oven’s cooling fan (on some models), which is separate from the vent fan, automatically comes on during microwave oven operation to cool the microwave oven. It may also automatically come on and cycle on and off to cool the microwave oven’s controls while the cooktop below is being used.

Replacement Parts, Accesssories and Cleaning Supplies

Following is a list of available parts and supplies which may be purchased separately. Please refer to the cover for contact and model identification information.

Replacment Parts

Turntable

Turntable support and rollers

Turntable hub

Cooking rack (for some models)

Rack clip

Rack support

Grease filter

Charcoal filter

Cooktop light bulb

Cavity light bulb

Accessories

Pan and handle

Steamer vessel

Cleaning Supplies

Heavy Duty Degreaser

All-Purpose Appliance Cleaner

Stainless Steel Cleaner and Polish

5

Image 6
Contents Page Microwave Hood Combination Safety W10182518AImportant Safety Instructions Settings FeaturesElectrical Requirements Cookware and Dinnerware Microwave Oven UseMicrowave Oven Care Troubleshooting Replacement Parts, Accesssories and Cleaning Supplies
Related manuals
Manual 6 pages 44.4 Kb

W10182518A specifications

Whirlpool, a leading home appliance manufacturer, has introduced several innovative components including Whirlpool part numbers 461966100611, W10182523A, and W10182518A. These parts are designed for use in various models of Whirlpool refrigerators and are essential for maintaining optimal appliance performance.

The Whirlpool 461966100611 is primarily a water filter, crucial for providing clean and fresh drinking water. This component operates with advanced filtration technology that significantly reduces contaminants such as chlorine taste and odor, lead, and other impurities. One of its most notable features is its ability to improve the overall quality of water while retaining beneficial minerals. This ensures that households can enjoy pure water for drinking and cooking, contributing to healthier lifestyles.

Another important model, W10182523A, serves as an ice maker assembly. This component plays a vital role in producing ice on demand, making it an indispensable feature for refrigerators used frequently for entertaining or in families that enjoy cold drinks. The ice maker utilizes advanced technologies to produce clear, high-quality bullet ice cubes efficiently. The easy installation process is a highlight, allowing homeowners to replace their ice maker with minimal hassle, ensuring a continuous supply of ice without long interruption.

The W10182518A is an essential component that refers to the ice maker's fill cup. This part ensures that water is appropriately directed to the ice mold, optimizing the ice-making process. Its robust design and efficiency enhance the overall functionality of the ice maker. This component's precise engineering guarantees minimal leakage and helps maintain the cleanliness of the refrigerator's interior, reflecting Whirlpool's commitment to quality and user convenience.

All these parts embody Whirlpool's dedication to innovation and reliability. They are designed with durability in mind, ensuring that they can withstand the demands of everyday use. The compatibility of these components with a range of refrigerator models adds to their value, making replacements straightforward for users. Moreover, Whirlpool's focus on customer satisfaction is evident in the ease of installation and the performance of their parts. With these components, users can expect enhanced functionality, reliability, and the efficiency that has made Whirlpool a trusted name in home appliances.