Display
When power is first supplied to the microwave oven, a “:” will blink on the display. Touch CANCEL•OFF to stop the blinking. If the “:” blinks on the display at any other time, a power failure has occurred. Touch CANCEL•OFF and reset the clock if needed.
If “RETRY” blinks on the display for 1 second, an invalid value has been entered. Retry your entry.
When the microwave oven is in use, the display shows cooking power, quantities, weights and/or prompts. When the microwave oven is not in use, the display shows the time of day or Timer countdown.
Progress Bar
The progress bar is a visual picture of the estimated running time of a cooking cycle. It will appear during Cook, JET DEFROST™ feature, Reheat and Sensor One Touch functions. The lines in each of the segments will light from left to right as the time nears the end. When all 12 lines (all 3 segments) are lit, the cooking cycle is complete.
Number Codes
The microwave oven is preset with shortcut number codes. A number code includes one or more of the following: cooking power, cook time and food quantity or weight. See the charts in the “Cooking” and/or “Reheating” sections for additional information.
Start
The START pad begins any function. If not touched within
5 seconds after touching a pad, “START?” will appear on the display as a reminder. If not touched within 1 minute after touching a pad, the display will return to the time of day mode and the programmed function will be canceled.
If cooking is interrupted, touching START will resume the preset cycle.
JET START™ Feature
The JET START™ control will start any function. If not touched within 5 seconds after touching a pad, “START?” will appear on the display as a reminder. If not touched within 5 minutes after touching a pad, the display will return to the time of day mode and the programmed function will be canceled.
If cooking is interrupted, touching the JET START™ control will resume the preset cycle.
The JET START™ control, touched by itself, will automatically start the microwave oven for a 30 second cook time at 100% cooking power.
The JET START™ control, touched while the microwave oven is operating in any cook function, will add 30 seconds of cook time at the cook power currently in use. Each touch of the JET START™ console pad will add 30 additional seconds of cook time.
Cancel•Off
The CANCEL•OFF pad stops most functions except for the Timer, Child Lock and Demo Mode.
The microwave oven will also turn off when the door is opened. Close the door and touch START to resume the cycle.
Clock
This is a
To Set:
The microwave oven and timer must be off.
1.Touch CLOCK.
2.Touch the number pads to set the time of day.
3.Touch CLOCK or START.
To Remove:
1.Touch CLOCK.
2.Touch 0.
3.Touch CLOCK.
The time will disappear and “:” will appear on the display.
Tones
Tones are audible signals, indicating the following:
One tone
■Valid entry (short tone)
■End of Timer countdown (long tone)
Two tones
■Reminder, repeat each minute after the
■End of stage in multistage cooking
■Turn food during defrost cycle (short tones)
■Hidden feature has been entered or exited
Three tones
■Invalid entry
Four tones
■End of cycle
To Turn Off/On Valid Entry Tones: Touch and hold the number pad “1” for 5 seconds until 2 tones sound. Repeat to turn tones back on.
To Turn Off/On All Tones: Touch and hold the number pad “2” for 5 seconds until 2 tones sound. Repeat to turn tones back on.
7