Using your freezer

1 Insert a coin In the slot of the Temperature Control to turn it.

2 Turn control to Number 3 This setting ISdesigned to

maintain the temperature at or near O’F ( 17.8 C)

under normal operating condrtions

Can be moved from side to side or removed when

loadrng or unloading food below it

To remove:

Loft basket out

To replace:

Lower basket intc place

The key eject lock...

can help reduce the hazard of child entrapment

1 Turn control to higher number for colder temper- atures

2 Turn to lower number for less cold temperatures.

1 Allow freezer to cool 6 to 8 hours before filling with

2 Let It cool overnight before addlng large amount of unfrozen food.

NOTE: When freezer ISfirst started the compressor will run constantly until the cabinet is cooled. It may take

up fo 6 to 8 hours or longer, depending on room tem- perature and the number of times the freezer lid is opened.

After the cabinet IScooled the compressor wtll turn

on and off as needed to keep freezer at proper temperature

To lock or unlock the freezer you must hold the key In the lock while turning The lock IS spring loaded so the key cannot be left in the lock

If the key IS lost, conract your WHIRLPOOL

dealer for a replacement Always grve the com- plete model and serial number of your freezer

when requesting a replacement key.

To replace:

1. Unplug power cord from outlet

2 Carefully snap out light cover and assembly with a

screwdriver by inserting It under the end of metal edge of the light. Be careful not to chip finish on freezer.

3 Unplug burned out signal light and replace with a new one. Signal light can be ordered from your WHIRLPOOL dealer.

4.Then, snap light assembly into place

5Plug power cord into outlet.