Using your freezer

Plug It In...

3-prong grounding type wall receptacl

Freezer power cord

Recommended Grounding Method

A 120 Volt, 60 Hz., AC only, 15 ampere fused electrical supply is required. It is recommended that a separate circuit serving only this appli-

ance be provided. The receptacle should not be controlled by a wall switch or pull chain.

Attach retaining clip over power cord plug

from the literature package inside your freezer. Do not use an extension cord.

Adjusting Cold Control...

l Turn control to higher number for colder temperatures.

l Turn to lower number for less cold temperatures.

Setting the Cold Control...

1.Insert a coin in the slot of the Cold Control to turn it.

2.Turn control to Number 3. This setting will main-

tain zero zone temperatures under normal op- erating conditions.

Cooling Freezer First...

l Allow freezer to cool 6 to B hours before filling with frozen food.

l Let it cool overnight before adding large amount of unfrozen food.

Note: When			freezer	is first started		the	compressor
will	run constantly			until the	cabinet		is	cooled.	It
may	take	up	to 6 to	B hours	or longer,		depending
on	room	temperature		and	the	number		of times

the freezer lid is opened.

After the cabinet is cooled the compressor will turn on and off as needed to keep freezer at proper temperature.

The outside of your freezer may feel warm. This is normal. The freezer’s design and main function is to remove heat from packages and air space inside the freezer. This heat is transferred to the room air so the walls of the freezer may be warm.

Exterior Signal light...

automatically warns of any unexpected power failure.

Signal light cover

If the signal light is not glowing, immediately check:

0 for power interruption,

l the power plug; it may be disconnected from the outlet,

l the warning light; it may be burned out.

To replace burned out signal light:

1.Unplug power cord from outlet.

2.Carefully snap out light cover and assembly

with a screwdriver by inserting it under the end of metal edge of the light. Be careful not to chip finish on freezer.

3.Unplug burned out signal light and replace with a new one. Signal light can be ordered from your Whirlpool dealer.

4.Then, snap light assembly into place.

5.Plug cord into outlet.

EH090FXK, EH060FXK specifications

Whirlpool has consistently been a leader in delivering innovative home appliance solutions, and the Whirlpool EH060FXK and EH090FXK models are no exceptions. These air conditioning units are designed to provide effective cooling and comfort, tailored for varying space requirements.

Both models feature a sleek and modern design that seamlessly blends into any interior decor. The EH060FXK is designed for smaller living spaces, offering a cooling capacity of 6,000 BTU, whereas the EH090FXK caters to larger areas with a robust 9,000 BTU cooling capacity. This flexibility allows homeowners to choose the model best suited to their specific needs.

One of the standout technologies in these units is the Energy Efficiency Ratio (EER). Both the EH060FXK and EH090FXK have impressively high EER ratings, making them energy-efficient options that help reduce electricity bills while maintaining optimum cooling performance. Eco-friendly refrigerants are also utilized, reflecting Whirlpool's commitment to sustainability.

The models come equipped with advanced air filtration systems that trap airborne particles, ensuring that the air circulated within your home is clean and healthy. This feature is particularly important for allergy sufferers, as it reduces dust and allergens in the atmosphere.

Another notable characteristic is the programmable thermostat. Both units allow users to set desired temperatures, automatically adjusting to maintain comfort levels. This feature aids in preventing energy waste, as the unit can switch to sleep mode during the night or when no one is at home.

In addition to cooling, these models can also be used for dehumidification, making them effective during humid summer months. The built-in timer function allows users to customize when the air conditioning system operates, offering convenience and enhancing energy efficiency.

The Whirlpool EH060FXK and EH090FXK models are also user-friendly, with easy-to-navigate control panels and a remote control option for added convenience. With their robust construction and reliability, these air conditioning units promise to deliver comfort and satisfaction for years to come.

To summarize, the Whirlpool EH060FXK and EH090FXK models embody a perfect combination of modern design, energy efficiency, health-conscious features, and user-friendly technology, making them suitable choices for any home seeking effective climate control solutions.