Using Your Refrigerator
Continued
Glass shelves are heavy. Be careful.
along guide
Exterior moisture control
The Exterior Moisture Control on the Control Console operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.
1.Use the OFF setting when humidity is low.
2.Use the ON setting if moisture forms on the outside of the refrigerator.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.
To remove glass shelves:
1.Remove items from shelf.
2.Tilt up at front.
3.Lift up at back.
4.Pull shelf straight out.
To replace glass shelves:
1.Guide the rear hooks into the slots in the shelf supports.
2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.
Adjusting the door bins
To remove door bins:
1.Lift up bin.
2.Pull bin straight out.
To replace door bins:
1.Slide bin in above desired button.
2.Push down until it stops.
Adjusting the shelf glides
The shelf glides can be used to secure odd shaped items or to separate other items.
1.Grasp glide.
2.Slide glide along guide. Shelf glide cannot be removed.