Rear Panel Features, Gain switch, Options

8.Gain switch channel A. Three of the switches in the DIP-switch selects the maximum gain of the channel to be either 20, 23, 26, 29, 32, 36, 39 or 41 dB. (See page 6).

9.AC power cable. WARNING!

A label just below the mains cable on the rear of the amplifier indicates the AC

! mains voltage, for which the amplifier is wired. Connect the power cable only to the

AC source referred to on the label.

5 REAR PANEL FEATURES

5.1 Gain switch

The gain switch located on the rear panel (the central DIP-switch) changes the input sensitivity of the amplifier. This can be handy when using low or high nominal input signals. E.g. most professional mixing consoles operate at a nominal level of +4 to +6 dBu; therefore you may use the 32dB position to provide you with plenty of fader movement. On the other hand, for a disco mixer operating at a nominal level of 0dBu or less use the higher gain positions.

5.1.1 The DIP-switch

There are separate sections for the two channels, so different gain can be selected for channel A or B. The selection of maximum gain in the amplifier is always a trade between noise and headroom. A

low gain amplifier amplifies less of the noise of the preceding

equipment (mixer, crossover, equalizer etc.). On the other hand a higher lever is needed to get full power, so the headroom will be decreased on mixer output and/or crossover units. In an actively divided system there is very often a so-called loudspeaker

processor or controller involved, being unique for the loudspeaker system. In most cases the manufacturers of these processors and/or loudspeakers recommend a specific system gain for the

amplifiers.

There are eight positions with different gain, from 20dB to 41dB in 3dB steps. See the different settings for the DIP-switches in the table below. The three switches to the very left are for channel B, and the three to the very right are for channel A.

5.1.2 Sensitivity

Sensitivity is defined as how many volts (rms) or dBu (referred to 0.775Vrms) are required to get full output power. As the output power varies with the load impedance, usually 4 ohms is the reference. But in case of an MLS-switch equipped amplifier there are enough choices for full output levels into different load impedances for a sensitivity table to fill several pages.

Hence we recommend calculating the sensitivity if this is necessary. Our ”Audio calculator” can do this, which is an Excel file with many useful formulas. It contains help for setting up digital loudspeaker processors and can be found on our website: www.tannoy.com .

The sensitivity calculator is found in the box labeled “Amplifier gain conversions”. The values to enter are in red; desired output power (see MLS-table), load impedance and the selected maximum gain. The sensitivity is in the box labeled “Input level for clip” in Vrms or dBu

5.13.Options

As the DIP-switch is recessed, one can put a sticker across the bay and prevent from unauthorized changes. Another option is to remove the DIP-switch. This should be done by authorized service personnel only! This corresponds to all switches set to “off”, i.e. 32dB gain and stereo mode.


Tannoy Limited	6
TA 1400 User Manual	11-06-02

TA 1400 specifications

The TOA Electronics TA-1400 is a professional-grade amplifier designed for various applications, including public address systems, commercial installations, and professional sound reinforcement. Renowned for its reliability and superior performance, the TA-1400 has become a popular choice among audio engineers and providers of sound solutions.

One of the main features of the TA-1400 is its robust power output, delivering 140 watts into 4 ohms. This high power rating ensures that the amplifier can drive a wide range of speakers, making it suitable for both small venues and larger environments. Its versatility allows users to adjust the output to meet specific needs, whether in a classroom, auditorium, or outdoor event.

The TA-1400 integrates advanced technologies, making it easy to use and efficient. It features a built-in mixer with multiple microphone and line-level inputs. This ensures seamless integration of different audio sources, whether it be microphones for events or music playback from various devices. Additionally, the advanced circuitry employed in the TA-1400 minimizes distortion and enhances audio clarity, allowing for crisp and clear sound reproduction.

Moreover, TOA has incorporated several protective mechanisms in the TA-1400 to ensure longevity and reliability. The amplifier includes overload protection, short-circuit protection, and automatic thermal shutdown. These features safeguard the amplifier against damage from excessive heat or electrical faults, ensuring consistent performance over time.

The design of the TA-1400 emphasizes user-friendliness, with intuitive controls and indicators that provide real-time feedback on the status of the amplifier. Users can easily adjust levels, monitor input signals, and gauge overall performance without any hassle.

Another noteworthy characteristic of the TA-1400 is its lightweight and compact form factor. This makes it easy to transport and install in various settings, providing flexibility for different configurations. Additionally, the unit can be mounted in a standard 19-inch rack, accommodating professional setups.

In summary, the TOA Electronics TA-1400 amplifier stands out for its powerful output, versatile input options, built-in protection features, intuitive interface, and portability. These attributes make it a vital component in achieving high-quality sound in any audio installation, whether for live events, educational environments, or commercial spaces. Its reliability and performance make it a trusted choice for audio professionals looking to elevate their sound solutions.