E. Install freezer
Level freezer so the door wiU stay open at any position.
1. Locate, remove and discard the 4 | |
bolts that held the freezer in the | |
shipping | crate. |
2. Locate the 2 front leveling legs | |
among | the packing materials. |
3. Screw these legs into the front | |
holes on the bottom of the freezer. | |
The back of the freezer rests on 2 | |
fixed supports. | |
4. Adjust the 2 front legs so freezer | |
does not rock. | |
5. Connect freezer to proper electrical | |
supply and attach retaining clip. | |
Parts And Features
Model RV12EFR
r
Model and
serial number I label
(on side wall)
Lower storage gate
Basegrille I
(Refer to “D.Locate proper |
electrical supply” on page 2.) |
Leveling
\ ,
6. Slide freezer into place. |
| |
7. Place a level on top of the freezer - | ||
| . | . |
first side to side then front to back. | ||
Turn leg clockwise to raise a |
| |
corner. Turn leg |
| |
to lower | a corner. |
|
8. Repeat step 7 until the freezer is |
| |
level. |
|
|
9. After freezer is fully loaded, |
| |
recheck | with level. |
|
legs -
(not shown)
Model RV15EFR
Statio;;z
>
shelves
Key eject lock
Lower
legs | Page 3 |
(not |