Reversing the door swing
You can reverse the door swing of your freezer so the door opens from the opposite direction.
To reverse the door swing:
1.Remove the counter top. (See “Removing the counter top” on page 8.)
2.Remove the
3.Gently lift the door up off the bottom hinge.
4.Remove the plastic hole plugs from the opposite side and replace them where the hinge sffews used to be.
5.On the top of the door, remove the plastic plugs from both comers and replace them in the opposite holes.
6.On the bottom of the door, remove the plastic plug and replace it in the opposite side.
7.Tilt your freezer back enough to remove the hinge assembly and screws from the bottom of the freezer cabinet.
8.Replace the bottom hinge assembly and screws in the opposite side of the cabinet.
9.Gently place the door on the bottom hinge.
10.Replace the top hinge assembly and screws.
11.Replace the adhesive strips on the top of the cabinet with the new strips supplied with the unit.
12.Replace the counter top.
Saving energy
You can help save energy.
lKeep the door dosed whenever possible. Avoid opening the door unnecessarily.
lNever place hot food inside the freezer.
lSet the Temperature Control lo the proper setting for your room conditions.
lPosition your freezer so it is slightfy tilted backward. This helps the door seal better.
lPlace your freezer in a well ventilated area, away from sunlight, hot surfaces, or humidity.
Vlew of top hinge assembly
View of top of door ’
Vlew of bottom hinge assembly
9