Troubleshooting

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

■Is the power outlet properly wired and polarized? Try another outlet to check for proper wiring and polarity.

■Is the power supply cord unplugged? Plug into a properly grounded 3 prong outlet.

■Has a household fuse blown or has the circuit breaker been tripped? Replace the fuse or reset the circuit.

■Is the main or regulator gas shutoff valve in the off position? See Installation Instructions.

■Is the range properly connected to the gas supply? Contact a trained repair specialist or see Installation Instructions.

Surface burners will not operate

■Is this the first time the surface burners have been used? Turn on any one of the surface burner knobs to release air from the gas lines.

■Is the control knob set correctly? Push in knob before turning to a setting.

■Are the burner ports clogged? On sealed burner models, see “Sealed Surface Burners” section. On open burner models, see “Surface Burners” section.

■Is the pilot light out? Light the surface burner pilots. (See “Pilot Lights” section.)

Surface burner flames are uneven, yellow and/or noisy

■Are the burner ports clogged? On sealed burner models, see “Sealed Surface Burners” section. On open burner models, see “Surface Burners” section.

■On models with caps, are the burner caps positioned properly? See “Sealed Surface Burners” section.

■Is the burner damaged? On models with caps, look for warped cap. Place cap, flat side-down, on a flat surface. If cap wobbles noticeably, it is warped. Place cap on different burner for further check of warping. Replace warped cap. Contact a trained repair specialist if the condition does not improve.

■Is the air/gas mixture correct? Contact a designated service technician to check the air/gas mixture, or see the Installation Instructions.

■Is propane gas being used? The appliance may have been converted improperly. Contact a trained repair specialist.

Surface burner makes popping noises

■Is the burner wet? Let it dry.

Cookware not level on cooktop

■Is the range level? Level the range. (See the Installation Instructions.)

■Is the proper cookware being used? Use cookware with a flat bottom. (See “Cookware” section.)

Excessive heat around cookware on cooktop

■Is the cookware the proper size? Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than 1 in. (2.5 cm) outside the cooking area.

Oven will not operate

■Is the power outlet properly wired and polarized? Try another outlet to check for proper wiring and polarity.

■Is this the first time the oven has been used? Turn any one of the surface burner knobs on to release air from the gas lines.

■Is the oven temperature control knob set correctly? See “Cooktop/Oven Temperature Controls” section.

■Is the main or regulator gas shutoff in the off position? Contact a designated service technician or see the Installation Instructions.

Oven makes muffled ticking noise when in use

■This is normal and occurs when the oven burner cycles on and off to hold the set oven temperature.

Oven burner flames are uneven, yellow, or noisy

■Is propane gas being used? The appliance may have been converted improperly. Contact a trained repair specialist.

■Is the air/gas mixture correct? Contact a designated service technician to check the air/gas mixture or see the Installation Instructions.

98014840 specifications

Whirlpool 98014840 is a premium replacement water filter designed for use with a variety of refrigerator models. This product is engineered to ensure that consumers receive clean, great-tasting water and ice by effectively reducing various contaminants. The filter is a testament to Whirlpool's commitment to quality and safety, featuring advanced filtration technologies that align with both user convenience and environmental responsibility.

One of the main features of the Whirlpool 98014840 is its high-level filtration system. This filter is capable of reducing up to 99% of lead, cysts, and other harmful contaminants, ensuring that the water you and your family consume is crisp, clean, and safe. Additionally, it removes chlorine taste and odor, which can often detract from the drinking experience. This level of filtration addresses common concerns among households, making it an essential appliance component.

The filter's design is also noteworthy. It is crafted to be easy to install and replace, allowing users to swap out the filter without the need for professional assistance. This convenience means that maintaining the quality of your drinking water is accessible and straightforward. The Whirlpool 98014840 is compatible with various Whirlpool and KitchenAid refrigerator models, making it a versatile choice for many consumers.

Furthermore, this water filter is constructed with eco-friendly materials. Whirlpool is dedicated to sustainability, and this filter supports their commitment by reducing plastic waste and promoting cleaner water. The filter has a lifespan of up to six months, depending on usage and water quality, which translates to fewer replacements and less environmental impact over time.

Moreover, the Whirlpool 98014840 is certified by the NSF International, which indicates that it meets rigorous safety and performance standards. This certification provides peace of mind to consumers, reassuring them that they are investing in a product that has been independently tested for safety and efficiency.

In summary, the Whirlpool 98014840 water filter stands out due to its advanced filtration capabilities, ease of use, eco-friendly construction, and certification from safety organizations. It is an essential addition to any household, ensuring that clean, great-tasting water is always at hand while supporting both health and environmental goals. This filter embodies Whirlpool's dedication to providing high-quality, reliable products for everyday use.