CARE AND CLEANING
•Always use the mildest cleaner that will do the job. Use clean, soft cloths, sponges or paper towels.
•Rub stainless steel finishes in the direction of the grain. Wipe area dry to avoid water marks.
•After cleaning, place all parts in their proper positions before using.
The cleaners recommended below indicate a type and do not constitute an endorsement. Use all products according to package directions.
Care and Cleaning Chart
A | Anodized | Top cap is not removable. Wash top and underside with hot sudsy water. | ||
| Aluminum | Rinse and wipe dry or apply Fantastic® or Formula 409® first to a clean | ||
| surfaces | sponge or paper towel and wipe clean. DO NOT USE powdered cleansers or | ||
|
| steel wool pads. | ||
|
|
|
| |
B | Aluminum | Clean filters in the dishwasher or by agitating in sudsy water. Ensure that | ||
there is no soil trapped in the fine mesh. Dry the filters before reinstalling | ||||
| Mesh Filters | |||
| them. |
| ||
|
| |||
C | Plastic | DO NOT REMOVE control knob. Wipe with a moist soapy sponge. Rinse | ||
| surfaces | and dry. | ||
|
|
| ||
D | Painted surfaces | For general care, wipe the outside of the hood with sudsy water or household | ||
|
| cleaners such as Fantastic or Formula 409, rinse well and dry with a clean | ||
|
| soft cloth to avoid water marks. | ||
|
| DO NOT USE powdered cleansers or steel wool pads. | ||
|
|
| ||
E | Stainless | Wipe and dry stainless steel in the same direction as the grain. Avoid using | ||
| Steel Surfaces | too much pressure, which may mar the surface. To remove finger prints and | ||
|
| give added shine, use cleaners such as Stainless Steel Magic. Do not allow | ||
|
| any cleaning compounds to remain in contact with stainless steel for | ||
|
| extended periods. | ||
|
|
|
| |
CUSTOMER SERVICES
Before Calling for Service
If the blower does not operate:
•Ensure that the electrical cord is properly connected and the supply circuit is energized.
•Check that the intake is fully raised.
•Make sure that the blower speed control knob is not in the OFF position.
How to Obtain Service
For authorized service or parts information, call
We want you to be a satisfied customer. If a situation arises that has not been resolved to your satisfaction, please let us know.
Write: Customer Support, BSH Home Appliances, Corp. 5551 McFadden Ave., Huntington Beach, CA 92649,
or call:
Please include the model number, serial number, and date of original purchase/installation.
6