Cisco Systems 1500 manual Band Splitter Module, Common transmitter output, Unused connector

Chapter 1 Product Overview

System Modules

Figure 1-11 Primary Chassis MUX and DMX Connectors

Common transmitter output

Unused connector WCM8 transmitter input WCM7 transmitter input WCM6 transmitter input WCM5 transmitter input WCM4 transmitter input WCM3 transmitter input WCM2 transmitter input WCM1 transmitter input

MUX

1-8(32)

nc

M1

8

6

4

2

DMX

1-8(32)

nc

D1

8

7

6

5

4

3

2

1

Unused connector

Common receiver input WCM8 receiver output WCM7 receiver output WCM6 receiver output WCM5 receiver output WCM4 receiver output WCM3 receiver output WCM2 receiver output WCM1 receiver output

39349

Band Splitter Module

The Cisco Metro 1500 series system uses four channel groups consisting of eight channels of data communication. The band splitter module (BSM) combines and splits these groups of multiplexed optical channels. The group signals from the MUX modules are combined and routed to the input ports and then are multiplexed for data transmission through one fiber to the BSM at the remote side of the link. Simultaneously, the BSM receives the combined signal at its remote input from the remote side of the link. This mixed signal is split into four groups for demultiplexing in the DMX modules.

	Cisco Metro 1500 Series Hardware Installation Guide
1-24	78-10588-03