Broan QS3 warranty Bottom cover, Electrical, Cable Clamp

Page 3

®

PREPARE THE HOOD

ALLURE® QS3 SERIES

RANGE HOOD

Page 3

PREPARE THE HOOD

3

Remove

 

Teflon® -coated

 

bottom cover

 

from hood. Set

 

cover and

 

mounting

 

screws aside.

Teflon® is a registered trademark of DuPont.

4 Remove

Damper/Duct Connector from inside the hood. Set connector aside - with mounting screws and parts bag.

DAMPER/

DUCT

CONNECTOR

TEFLON®-COATED BOTTOM COVER

(Held in place with 2 screws)

AIR CHUTE

7

Remove Air

 

Chute - held in

 

place with one

 

(1) screw.

NOTE: Be careful not to disconnect any wires.

8

Remove Baffle

 

from air chute.

BAFFLE

5

Remove

 

either top or

 

back wiring

 

knockout and

 

install

 

approved

 

Electrical

 

Cable Clamp.

BAFFLE

ELECTRICAL CABLE CLAMP

Non-Ducted Installation - Skip to “Connect Wiring” section.

 

(3) #8 SCREWS

LIGHT

 

PANEL

The following

 

 

 

Steps (6 thru

(2) #6 SCREWS

 

14) are for

 

 

 

DUCTED

 

 

INSTALLATION

 

 

ONLY.

 

 

6 Remove Light Panel - held in place with (3) #8 screws and (2) #6 screws. Disconnect light assembly wire harness

(white connector).

9

10

Rotate baffle. Reinsert baffle into air chute (as shown) so that baffle tabs fit all the way into slots in air chute. An audible “click” will be heard when fully installed. This will close off the air flow through the non-ducted slots on top of hood.

SLOTS

Re-install air chute, re-connect wire harness, and replace light panel.

NOTE: Be careful not to trap wires between support fin and light panel.

TABS

SUPPORT FIN

Image 3
Contents Read and Save These Instructions Table of ContentsPrepare the Hood Prepare Hood Location Prepare Hood LocationBottom cover ElectricalCable Clamp To Top/Back Edge of hood Connect Wiring Install Hood Cleaning NON-DUCTED FiltersOperation KEY NO. Part no Service PartsBROAN-NUTONE ONE Year Limited Warranty WarrantyContenido Para Cocinar Doméstico Solamente Advertencia PrecaucionPreparación DEL Lugar Donde Preparación DE LA Campana #8 Tornillos Panel DE#6 Tornillos Con dos tornillos Coloque el regulador de tiro/conector del conducto sobreQuite el agujero o agujeros ciegos para los conductos Vuelva a instalar la placa del conducto redondo deConexión Eléctrica Filtros SIN Conductos OperaciónLimpieza Clave N.º Pieza N.º Piezas DE ServicioGarantia BROAN-NUTONE Limitada POR UN AÑO Garantia

QS3 specifications

The Broan QS3 series range hood stands out as a premium appliance designed to elevate kitchen ventilation. With its sleek design and efficient performance, it has quickly become a favorite among homeowners and professional chefs alike. Featuring a contemporary style, the QS3 series seamlessly integrates into modern kitchens while providing powerful ventilation capabilities.

One of the main highlights of the Broan QS3 is its exceptional airflow performance. Offering a maximum airflow of up to 400 CFM, this range hood efficiently captures smoke, steam, and odors from cooking, ensuring cleaner indoor air quality. This is particularly beneficial for those who love to cook with strong spices or in high heat. Moreover, the QS3 is equipped with a sound-absorbing design that minimizes noise, making it a quieter option compared to traditional range hoods.

The QS3 series incorporates advanced LED lighting, offering bright illumination to the cooking surface below. This energy-efficient lighting not only enhances visibility while cooking but also adds a modern touch to the overall aesthetic of your kitchen. The adjustable fan speeds allow users to customize the ventilation based on their cooking needs, providing flexibility and control during food preparation.

Another notable feature of the QS3 range hood is its easy-to-clean design. The stainless steel baffle filters are dishwasher-safe, ensuring that maintenance is a breeze. These filters are designed to effectively trap grease and are built to last, promoting both safety and efficiency in the kitchen.

In terms of installation, the Broan QS3 offers versatility with multiple mounting options, accommodating different kitchen layouts and cabinetry. The hood is designed for either ducted or ductless venting, making it suitable for various home configurations.

Overall, the Broan QS3 series range hood combines style, performance, and convenience. With its powerful airflow, low noise levels, LED lighting, and ease of maintenance, it is an excellent choice for anyone looking to enhance their cooking experience. Whether you are a casual cook or a culinary expert, the QS3 series brings functionality and elegance to your kitchen, creating a cleaner and more enjoyable cooking environment.