Install Cooktop, Adjustment, USE and Care

INSTALL COOKTOP

1.Align the cooktop with the downdraft and fasten cooktop in place.

Note: Accurate alignment of cooktop and downdraft is necessary to ensure that there is no interference when air vent is raised and lowered. There should be a gap of 1/32"-1/16" between the back of the cooktop and the front of the downdraft cover.

USE AND CARE - (Continued)

CONTROLS

ADJUSTMENT

The downdraft is factory-adjusted for proper operation. However, shipping and handling may affect the position of the activating switch.

To adjust position of activating switch:

WARNING: To avoid possible electrical shock, personal injury or death - Disconnect electrical power.

1.If downdraft is plugged into electrical outlet, unplug it.

2.Lift air vent straight up and cock it slightly so it remains in the UP position.

SWITCH

MEMBRANE

	SCREWS
SWITCH	SWITCH
BRACKET	COVER

3.Remove switch cover from right end of air vent.

4.Loosen the 2 screws holding the switch bracket in place. Position switch bracket so that activating switch just comes in contact with underside of switch membrane. Tighten screws.

5.Replace switch cover, gently lower air vent into chimney, and plug in power cord. Re-connect electrical power and check operation.

Turn the downdraft blower ON by pressing down on the activating switch. The air vent will rise.

KNOB

The blower can be turned ON or OFF and its speed can be adjusted with the recessed knob on the right side of the air vent.

Turn the downdraft blower OFF by pressing the activating switch again. The air vent will go down and the blower will shut OFF.

Note: For most convenient operation, set the blower to your favorite speed. The blower will come on to this speed whenever the activating switch is pressed and the air vent rises.

CLEANING

WARNING: Always disconnect electric power supply before cleaning unit.

Use a mild detergent suitable for painted surfaces. DO NOT USE ABRASIVE CLOTH, STEEL WOOL PADS, OR SCOURING POWDERS. Vacuum blower to clean. Do not immerse blower in water.

Wash the 2 aluminum grease filters in a mild detergent solution or a dishwasher. Remove them from the air vent by grasping the tab at the top of each filter.

Note: The filters are different sizes. Be sure to replace them as removed, (wider one on the left), with tabs UP.

SERVICING

WARNING: Always disconnect electric power supply before servicing unit.

	It may be necessary to remove the outlet assembly from the
	cabinet in order to service components such as the blower motor
USE AND CARE	or air vent mechanism.
USE AND CARE	Disconnect power to the cooktop and remove it first. Reverse the
Always turn the downdraft blower on before you begin cooking to	steps under “MOUNT THE UNIT” to remove the downdraft from
establish an air flow in the kitchen. Let the blower run for a few	the cabinet.
minutes to clean the air after you turn the cooktop off. This will	Service parts are available from your local distributor.
keep the whole kitchen cleaner and brighter.	5

273003 specifications

The Broan 273003 is a versatile and efficient range hood designed to enhance your kitchen environment while providing powerful ventilation. Crafted with a sleek and modern design, this model seamlessly integrates into various kitchen styles, making it a popular choice among homeowners and chefs alike.

One of the standout features of the Broan 273003 is its impressive airflow capacity. It offers multiple speed settings, which allow users to customize the ventilation according to their cooking needs. The range hood effectively eliminates smoke, steam, and cooking odors, ensuring that your kitchen remains fresh and comfortable even during the most intense cooking sessions.

Incorporating state-of-the-art technology, the Broan 273003 uses a robust motor that guarantees reliable performance. The noise level is kept to a minimum, providing a quiet operation that doesn’t disturb family gatherings or social events in the kitchen. Additionally, the range hood is designed to be energy-efficient, helping users to manage their electricity bills while contributing to a more sustainable lifestyle.

The Broan 273003 also boasts user-friendly features such as easy-to-use controls that make selecting fan speeds a breeze. The integrated lighting enhances visibility while cooking, with built-in lights that illuminate your stovetop, allowing for precise cooking and monitoring of food.

Maintenance is simplified with dishwasher-safe filters that trap grease and grime, safeguarding your kitchen from potential buildup. These filters are easy to remove and clean, making it convenient for homeowners to maintain optimal performance.

In terms of installation, the Broan 273003 is designed to fit a variety of cabinet styles and can be mounted either under cabinets or to the wall, giving users options depending on their kitchen layout. Its compact yet powerful design makes it a practical choice for both small and large kitchens alike.

Overall, the Broan 273003 range hood is an excellent investment for anyone looking to improve air quality in their kitchen while adding a stylish touch. With its combination of efficiency, quiet operation, and ease of maintenance, this range hood stands out as a leader in its category. Whether you're a casual cook or a gourmet chef, the Broan 273003 will meet your ventilation needs while enhancing your cooking experience.