CDA CIGE9 manual Changing the Light, Bulb replacement is not covered by the guarantee

Page 5

Changing the Light

IMPORTANT: DO NOT PERFORM MAINTENANCE OR CLEANING OF THE EXTRACTOR WITHOUT FIRST SWITCHING OFF THE ELECTRICITY SUPPLY.

DO NOT CHANGE THE LIGHT BULB IMMEDIATELY AFTER USE AS THE BULB WILL BE HOT. ALLOW IT TO COOL BEFORE REMOVING IT.

1.Remove the grease filters as described above.

2.Remove the faulty light bulb and replace with a light bulb no more powerful than that specified on the rating plate.

3.Replace the grease filters.

Do not touch bulbs or adjacent areas during or straight after prolonged use of the lights.

The light is designed for use during cooking and not for general room illumination. Extended use of the light can reduce the lifespan of the bulb.

Bulb replacement is not covered by the guarantee.

Only use bulbs recommended for your extractor. Do not fit bulbs of a higher power rating. Bulbs of a lower power rating may be adequate for use, generally last longer, and use less energy.

Spare bulbs are available from CDA Customer Care or from your local DIY shop.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Customer Care Department CIGE9 ExtractorsPlease note Appliance informationCE Declarations of Conformity To switch the extractor light on or off Using your ExtractorTo switch on the extractor, or change the motor speed To switch the extractor offCleaning Care and MaintenanceCleaning the grease filter Changing the charcoal filter re-circulating onlyChanging the Light Bulb replacement is not covered by the guaranteeMains Electricity Connection TroubleshootingElectrical Information If your extractor is not workingDucting and Ventilation Installation203 To fix your extractor to the ceiling, proceed as follows191 Page Page Page Customer Care Department
Top Page Image Contents