Cannon 10430G, 10685G, 10682G, 10476G, 10475G installation instructions Installation Instructions

Page 23

INSTALLATION INSTRUCTIONS

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment conditions for this appliance are stated on the rating label which is fitted on the back panel.

This appliance is not designed to be connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. particular attention should be given to the relevant requirements regarding ventilation.

MODEL NUMBER 10430G, 10682G, 10685G, 10688G, 10475G, 10476G Category Il2H3+ (GB. IE)

These models are set to burn NATURAL GAS (G20) at 20mbar but can be converted for use on BUTANE (G30) at 28-30mbar or PROPANE (G31) at 37mbar with the use of the conversion kit (refer to page 27).

GAS SAFETY (INSTALLATION & USE) REGULATIONS

It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the above regulations. It is in your interest and that of safety to ensure compliance with the law.

In the UK, CORGI registered installers work to safe standards of practice. The cooker must also be installed in accordance with BS 6172.

Failure to install the cooker correctly could invalidate the warranty liability claims and could lead to prosecution.

LOCATION

The cooker may be located in a kitchen, kitchen/diner or a bed-sitting room, but not in a room containing a bath or shower. The cooker must not be installed in a bed-sitting room of less than 20m3.

When adjusted for use on BUTANE (G30) or PROPANE (G31) the cooker must not be installed in a room or internal space below ground level, e.g. in a basement.

PROVISION FOR VENTILATION

The room containing the cooker should have an air supply in accordance with BS 5440: Part 2.

The room must have an opening window or equivalent; some rooms may also require a permanent vent. If the room has a volume between 5 and 10m3, it will require an air vent of 50cm2 effective area unless it has a door which opens directly to outside. If the room has a volume of less than 5m3, it will require an air vent of 100cm2 effective area. If there are other fuel burning appliances in the same room, BS 5440: Part 2 should be consulted to determine air vent requirements.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Henley Professional Traditional Contents Introduction Always For Your SafetyFor Your Safety Guidance on Automatic Cooking Timer OperationAutomatic Cooking Clockface Setting the Time of DAY Auto Cooking Programmes Timer Operation Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingTo USE the Grill GrillGrill PAN Handle Main Oven FAN Cooking OvensTOP Oven Conventional Cooking To USE the TOP OvenOven Cooking Chart Oven Preparing Food for Slow Cooking ‘SLOW COOK’ SettingReplacement of Oven Light Bulb Care and CleaningOven Heat Clean Linings Vitreous Enamel Cooker Finish Cleaning MethodSomething Wrong With Your Cooker Problem CheckDisposal of Your Product Installation Instructions Technical Data Dimensions Space for Fixing Levelling Electrical Installation Key Contacts

10475G, 10430G, 10476G, 10682G, 10685G specifications

Cannon is known for its innovative and high-quality printers that cater to various printing needs. The models Cannon 10685G, 10682G, 10475G, 10430G, and 10476G are notable for their advanced features and superior performance in both home and office environments.

The Cannon 10685G stands out with its exceptional print resolution and speed. It boasts a high page yield, making it a cost-effective choice for frequent users. This model incorporates advanced inkjet technology, ensuring vibrant colors and sharp text, ideal for both documents and photographs. Its wireless connectivity feature allows seamless printing from mobile devices, enhancing convenience and accessibility.

Next, the Cannon 10682G supports multiple media types, providing versatility for users who require different print formats. Equipped with a user-friendly interface, this printer makes it easy to navigate through various settings. The 10682G also features automatic duplex printing, which significantly reduces paper usage and enhances productivity.

The Cannon 10475G is designed with small businesses in mind. Its compact size does not compromise performance, making it a great fit for limited office spaces. This model includes enhanced security features, ensuring that sensitive documents are protected. With high-speed printing and low energy consumption, the 10475G is an efficient option for busy environments.

For those looking for a reliable all-in-one solution, the Cannon 10430G offers scanning, copying, and faxing capabilities alongside printing. Its multifunctionality saves both time and resources, making it an attractive option for home offices. This model supports various connectivity options, including USB and Wi-Fi, enabling easy integration into existing networks.

Finally, the Cannon 10476G excels in delivering consistent performance over a long period. It utilizes high-capacity ink cartridges, reducing the frequency of replacements and lowering operational costs. This printer is particularly favored for high-volume printing tasks, ensuring that users can complete projects swiftly without sacrificing quality.

Collectively, these Cannon models provide a range of features suited for different needs, whether for personal use, professional environments, or small businesses. Their emphasis on innovation, efficiency, and quality makes Cannon a reliable choice for anyone in need of dependable printing solutions. These printers exemplify the company's commitment to enhancing productivity while maintaining exceptional print quality.
Top Page Image Contents