Cannon ICON 1000, 10425G installation instructions Something Wrong With Your Cooker, Problem Check

SOMETHING WRONG

WITH YOUR COOKER

Before contacting your Service Centre or Installer, check the problem guide below, there may be nothing wrong with your cooker.

PROBLEM	CHECK
Slight odour or small amount	This is normal and should cease after a short period.
of smoke when grill/oven
used for first time.
Oven cooks too fast or too	Check that the oven setting and shelf positions are as
	recommended in the Cooking Charts. However, it
slow.
	may be necessary to increase or decrease the recom-
	mended setting slightly to suit your taste.
Ignition does not work.	If all burners fail to ignite:
	Check that sparks appear at the burners; a clicking
	noise should be heard.
	If not
	(i)	Check that the electricity supply is turned on.
	(ii) Check other appliances to see if you have had a
		power cut.
	If only one burner fails to ignite:
	(i)	Check the burner cap is seated correctly.
	(ii) Check the slots in the burner bodies are not
		blocked with any soap residue or cooking soil
		(see care and cleaning).
	(iii) Check, if the burners have recently been
		cleaned using a wire wool pad eg. “Brillo Pad’,
		ensure that no stray strands are caught on the
		igniter or burner body.
	NOTE. Satisfactory ignition will only be achieved if all
	the hotplate burners are fitted.
	In the event of an electricity failure, all burners can be
	lit with a match.
Timer Display shows ‘0:00’	The electricity supply to the cooker may have been
	interrupted but has now come back on again. Set
	the correct time of day by following the instructions
	given in the Timer section of this book.

If there is still a problem contact your local Service office

(see KEY CONTACTS, back page.

20