Making Coffee, Filling the Water Tank | Capresso MT500 instruction

there could still be hot water in the filter holder passing through the ground coffee. This can take 1 to 3 minutes depending on how much coffee you used and how fine the coffee was ground.

5. Making Coffee

Please follow the steps described in chapter 4.

Filling the Water Tank

The water level indicator shows you how much water will be brewed. CAUTION: Make sure the water level does not reach the letter "M" of the word MAX (see Fig. 6). If you fill more water into the water container the stainless steel carafe can overflow with hot coffee which can cause severe injuries.

When you use the thermal carafe for filling the water tank, the inside of the carafe will be cold from the cold water. We highly recommend rinsing the carafe with hot water. This will increase the coffee temperature and will keep the coffee hot longer.

5a. Using the GoldTone Filter

A size 4 GoldTone filter comes with the machine. It sits in the Filter Holder. Attention: Coffee flows slower through a GoldTone Filter than through paper filters. Please see the chart in chapter 5c for maximum coffee amounts.

5b. Using Filter Paper

Use size 4 paper only. Always fold the bottom and side crimps over for a proper fit (see Fig. 5). Do not use a filter paper inside a GoldTone Filter!

5c. How Much Coffee?

A coffee scoop comes with your MT500. We recommend using one level scoop of coffee per cup. If you like your coffee extremely strong never use more coffee than the amounts indicated in the chart shown.

Maximum #	GoldTone	Size 4
of Scoops	Filter	Paper Filter

Regular or Drip	12	14
Grind (Supermarket	scoops	scoops
Version)

Fine Grind (finer	8-10	9-11
than Drip Grind)	scoops	scoops

Using more coffee can result in an overflow of ground coffee, above the filter, blocking the drip stop function and causing a mess on your counter.

5d. Using the Stainless Steel Carafe For best coffee temperature pre-warm the carafe by rinsing it with hot water. Always make sure carafe is completely empty. Place the lid on top of the carafe as shown in Fig. 10 (pay atten- tion to the position of the black dot on the lid) and turn one full turn clockwise until closed (see Fig. 11). Do not tighten too much. Caution: Make sure the lid is not in the pouring position (Fig. 12). This could result in the Filter Holder popping up. The drip stop will not work and hot coffee could overflow from the filter holder. Attention: Please note that the lid must always be on the carafe and closed (Fig. 11) during brewing to activate the drip stop. If you lose the lid, you cannot brew coffee. Please call 1-800-767-3554 to order a new lid or use the enclosed mail order form. Place the carafe on the platform.

5e. Turning the Coffee Maker On Push the On/Off button (Fig. 2, N). The red light will illuminate, indicating that the brewing process is starting. Caution: Never open the water con- tainer lid during brewing.

5f. Serving Coffee

Brewing time for a full pot of coffee takes just about 7 minutes. Then all the water is passed through the heat-

MT500 specifications

The Capresso 440, MT500, and MT500 Plus are part of Capresso's esteemed line of coffee makers that stand out for their innovative technologies and user-friendly features. Designed for coffee enthusiasts, these machines are engineered to enhance the brewing experience while delivering rich and flavorful beverages.

The Capresso 440, equipped with advanced brewing technology, provides a seamless way to brew delicious coffee. It features a stainless steel vacuum-insulated carafe that not only preserves heat but also keeps coffee fresh for hours. The 440 comes with an adjustable drip tray, allowing for the brewing of different cup sizes, from small espresso shots to larger mugs. Its easy-to-use interface includes programmable settings, enabling users to set their desired brew times for a customized experience.

The MT500 model is another standout, particularly known for its versatility and high-quality construction. It features a dual water system that allows for both drip brewing and espresso, accommodating a wide range of coffee preferences. The MT500 is designed with a built-in grinder, ensuring that users can enjoy freshly ground coffee with every brew. This machine also showcases a user-friendly LCD display, making it simple to navigate through its various functionalities. Its sleek design adds a modern touch to any kitchen.

The MT500 Plus enhances the MT500 model by offering additional programmable options, allowing users to fine-tune their brewing settings even further. This model incorporates advanced thermal technology that ensures optimal brewing temperatures, elevating the extraction process for a rich and aromatic flavor. With a large water reservoir, the MT500 Plus can brew multiple cups in one go, perfect for entertaining guests or enjoying several cups throughout the day.

All three Capresso models prioritize user convenience, featuring easy-to-clean components and a commitment to quality. From the stainless steel finishes to the ergonomic designs, each coffee maker demonstrates Capresso's dedication to combining aesthetics with functionality. In conclusion, whether it’s the foundational Capresso 440 or the advanced MT500 and MT500 Plus models, coffee lovers can enjoy a superior brewing experience backed by innovative technology, ensuring every cup is a delightful journey into flavor.