Proper Sequence for Making Coffee

Light is on, the machine monitors time and the number of brewings.

The green charcoal filter light will start blinking either after 6 weeks or after the Coffee Brewing Button has been turned on 60 times whichever comes first, reminding you to replace the cartridge.

If you make coffee once a day, the filter light will start flashing after 6 weeks. If you make coffee twice a day, the light will flash after 30 days. This will help you to plan the right amount of cartridges.

Attention: When you unplug the machine for more than 10 seconds or if you have a power failure, the electronic indicator loses its memory. Then it is best to replace the filter 6 weeks after first use.

Caution: Once the cartridge is activated you should never use it for longer than six weeks. Harmful bacteria build-up may occur. Unused cartridges can be stored indefinitely.

Replacement cartridges are available through your local Capresso dealer or by using the enclosed mail order form or through the website: www.capresso.com.

3b. Replacing the Cartridge / Resetting the Filter Indicator Remove the cartridge from the water container (Fig. 3), twist and open the holder and discard the old cartridge. Replace with new cartridge (Fig. 4) and close the filter holder securely. Insert the assembly back into the water tank (Fig. 3) and make sure it is inserted properly otherwise the water container lid will not close completely. Activate the charcoal filter (chapter 3a).

While the green light is still blinking, push and hold the Charcoal Filter Button for a few seconds until the light stops blinking and is illuminated. The indicator starts counting again.

4.The Proper Sequence for Making Coffee

Coffee makers produce very hot water. If you follow the sequence as described below you will avoid possible accidents which might cause severe injuries and burns.

1.Remove carafe from machine.

2.Remove the water container and fill with the desired amount of water. Do not fill above the MAX setting. Replace the water

container and make sure it sits firmly in place.

3.Push the Filter Release button (Fig 1, B) so that the filter holder housing swings to the right. Make

sure the filter holder insert sit firmly in place with the handle pushed down.

Caution: When you push against the drip stop from the bottom, and the filter holder lifts up, re-insert the filter holder. Otherwise the drip stop will not open during brewing. Hot water could overflow from the filter causing injuries.

4.Insert filter paper (chapter 5b) or a GoldTone Filter (chapter 5a).

5.Add the correct amount of ground coffee (chapter 5c).

6.Swing the filter holder back into the machine. Make sure it engages under the Filter Cover (Fig. 1).

7.Make sure the lid sits properly on the glass carafe. Insert the carafe into the machine. The inner part of the lid pushes the drip stop up, to let coffee brew through.

8.Turn the machine on (Fig. 2, L).

9.Never push the Filter Release Button during brewing. Hot water could spill out causing burns.

Wait until the brewing noise stops.

10.Immediately after brewing is finished there could still be hot water in the filter holder passing through the ground coffee. This can take

1 to 3 minutes depending on how

476 specifications

The Capresso 476 is an exceptional coffee maker designed for coffee enthusiasts seeking a perfect blend of convenience, technology, and quality. This innovative machine stands out in a saturated market by incorporating a variety of features that enhance the overall brewing experience.

One of the main highlights of the Capresso 476 is its optimal brewing temperature, which ensures that coffee extracts all the essential flavors and aromas. With an innovative heating system, the machine heats water to the ideal temperature range of 195°F to 205°F, allowing for a full-bodied and rich cup of coffee. This meticulous temperature control plays a crucial role in delivering consistent results, ensuring that each brew is as delightful as the last.

In terms of capacity and design, the Capresso 476 can brew up to 10 cups of coffee. Its sleek, modern design integrates seamlessly into any kitchen decor while also being compact enough for smaller spaces. The glass carafe features an ergonomic handle and a drip-free spout, making pouring easy and mess-free. The machine is equipped with an intuitive control panel that allows users to adjust settings with ease, providing a user-friendly experience.

The Capresso 476 employs a unique brewing technology that utilizes a pre-infusion feature. This allows the coffee grounds to bloom before the actual brewing process begins, resulting in enhanced flavor extraction. This technique is particularly beneficial for high-quality coffee beans as it ensures that the full flavor profile is captured.

Furthermore, the machine includes a built-in programmable timer, allowing coffee lovers to wake up to the enticing aroma of freshly brewed coffee. Users can set the machine to start brewing at a specific time, ensuring that their favorite beverage is ready when they are.

Cleaning and maintenance are made easy with the Capresso 476, as many of its parts are dishwasher-safe. This convenience allows users to focus more on enjoying their coffee rather than worrying about upkeep.

Overall, the Capresso 476 offers an impressive array of features, combining innovative technology with practical design. It caters to both casual coffee drinkers and serious enthusiasts alike, making it a valuable addition to any kitchen. Whether you're brewing for a crowd or indulging in a quiet moment alone, this coffee maker delivers quality and convenience in every cup.