Capresso 454 warranty Preparing the machine 7.1 Before First Use, The Display, Setting The Time

7.Preparing the machine 7.1 Before First Use

a. After unpacking clean all loose parts with warm water and make yourself familiar with the different functions.

b. After reading the instructions, brew 3 cups of water to clean all internal parts and to activate the charcoal filter.

7.2 The Display

When you plug in the coffee maker, the LCD displays AM and a flashing “12:00.” The “Grind Amount Indicator” (G1) shows the number “10” bold and the num- bers 2, 4, 6, 8 outlined. The “Strength Indicator” (G3) shows three cups, one outlined on the left (stands for mild), one shaded in the middle (stands for regular), and one black on the right (stands for strong). The saucer sits under the middle cup (regular). The green filter light is illuminated (G7). This is the factory setting.

7.3 Setting The Time

Push and hold the "h"-button (G8) to set the hour. Then push and hold the "m"-button (G9) to set the minutes. Now the time is set. To change the actual time, repeat above steps.

7.4Grinder Setting for Current Use a. Push and hold the "2-10" button

(G11). The bold number in the Grind Amount Indicator (G1) will change. When the desired num- ber is bold, release the button.

b. Push and hold the "strength" button (G12). The saucer will jump from cup to cup. When

the

saucer sits under the desired cup, release the button.

c. To change any of these settings, repeat above steps.

7.5Programming The Timer And Grinder For Later Use

To program the grinder and coffee maker to start automatically at a pre-set time proceed as follows: a. Make sure the current time is set.

8