Basic Operation

5. OPERATION

Note:

•Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).

CAUTION

When this unit is turned on, starting and stop- ping the engine of a car with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume.

1) Press the POWER button 5.

Adjusting the tone

Press A-M button 4 and select the item to adjust. Each time you press A-M button 4, the item changes in the following order:

“B ASS” ➜ “TREB” ➜ “B AL” ➜ “F AD” ➜

Function mode...

* To turn the power off, press the POWER button	Adjusting the bass
for at least 1 second.

English

2)Press the FUNC button 5 to select another operation mode. The mode switches as fol- lows each time the FUNC button is pressed: Radio ➜ Tape ➜ CD changer ➜ Radio

*If a component is not connected, that operation mode cannot be selected.

*“CASS” appears when no tape is loaded in the source unit, and “DISC” appears when no disc is loaded in the CD changer.

1.Press A-M button 4 and select “BASS”.

2.Turning the Rotary knob 3 clockwise emphasizes the bass; turning it counter- clockwise attenuates the bass.

*The factory default setting is “0”. (Adjustment range: –6 to +6)

3.When the adjustment is complete, press A-M button 4 several times until the function mode is reached.

Adjusting the volume

Turning the Rotary knob 3 clockwise increases the volume; turning it counterclockwise decreas- es the volume.

*The volume level is from 0 (minimum) to 33 (maxi- mum).

Setting the Z-enhancer

This unit comes with 3 types of sound tone effects stored in memory. Select the one you prefer.

*The factory default setting is “OFF”.

Each time you press Z-EHCR button 7, the tone effect changes in the following order:

“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z- ENHANCER 3” ➜ “OFF” ➜ “Z-ENHANCER 1”...

•Z-ENHANCER 1 : bass emphasized

•Z-ENHANCER 2 : treble emphasized

•Z-ENHANCER 3 : bass and treble empha-

sized

• OFF

: no sound effect

Adjusting the treble

1.Press A-M button 4 and select “TREB”.

2.Turning the Rotary knob 3 clockwise emphasizes the treble; turning it counter- clockwise attenuates the treble.

*The factory default setting is “0”. (Adjustment range: –6 to +6)

3.When the adjustment is complete, press A-M button 4 several times until the function mode is reached.

Adjusting the balance

1.Press A-M button 4 and select “BAL”.

2.Turning the Rotary knob 3 clockwise emphasizes the sound from the right speak- er; turning it counterclockwise emphasizes the sound from the left speaker.

*The factory default setting is “0”. (Adjustment range: L9 to R9)

3.When the adjustment is complete, press A-M button 4 several times until the function mode is reached.

6 XA311

XA311 specifications

The Clarion XA311 is an advanced car audio amplifier that offers impressive sound quality and a variety of features designed for audiophiles seeking enhanced playback in their vehicles. Known for its power, versatility, and compact design, the XA311 stands out as an excellent choice for both casual listeners and dedicated car audio enthusiasts.

One of the main features of the Clarion XA311 is its 2-channel configuration, which allows for flexibility in setting up a sound system. This capability enables users to drive a pair of speakers or bridge the channels for a more powerful output to a single subwoofer. With a maximum power output of 110 watts per channel at 4 Ohms, this amplifier is capable of delivering the clean, rich audio that every music lover desires.

The XA311 employs high-quality circuitry to ensure minimal distortion and an impressive signal-to-noise ratio, which enhances the clarity and depth of audio playback. The inclusion of a built-in low-pass filter provides added control over frequency selection, allowing users to tailor their sound systems to suit individual preferences. This feature is especially useful when integrating subwoofers into the setup, ensuring better sound quality and performance.

In terms of technologies, the Clarion XA311 utilizes Class AB amplification, which is well-regarded for its efficiency and sound fidelity. Class AB amplifiers combine the benefits of both Class A and Class B designs, making them a popular choice for high-performance audio applications. The XA311 also boasts thermal protection circuitry, which safeguards the amplifier from overheating, ensuring reliable operation even during prolonged use.

The compact design of the XA311 makes it easy to install in various vehicle types, without sacrificing power or audio quality. Its sleek and rugged construction ensures durability, while the user-friendly layout facilitates straightforward installation and adjustments. Additionally, the amplifier features adjustable gain control, enabling users to customize the output strength to match the input levels from the head unit.

Overall, the Clarion XA311 exemplifies modern engineering with its combination of power, flexibility, and sound quality. Whether upgrading an existing system or building a new one, this amplifier is a great choice for those who demand an exceptional listening experience on the road. It has something to offer for a wide array of needs and preferences, making it a standout option in the competitive car audio market.