TOA Electronics 110SR owner manual Cutting drywall using the Rotozip

Page 13

MECHANICAL INSTALLATION 110SR

Fig. 4: Pre-installation ring on steel

furring channel prior to drywall

being placed.

Fig. 7: Installing the subwoofer using the ledge to temporarily secure it.

Fig. 5: Cutting drywall using the Rotozip™.

Fig. 8: Attaching the subwoofer to

the pre-installation ring.

Fig. 6: Completed install showing the

reveal of the pre-installation ring

relative to the ceiling board.

Fig. 9: Completed subwoofer detail.

Fig. 11: Rotozip™ showing guidepoint bit.

Fig. 10: Completed subwoofer installation.

Image 13

Contents Series Subwoofers N E R ’ S M a N U a L Series SubwoofersUnpacking Damage Claims Warranty / Damage ClaimsCabinet Options Series Subwoofers and Input Modules110TB Tile Bridge Cabinet 110SR Sheet Rock CabinetPassive Standard Input Module OptionsLO Pass Filter Active Active Subwoofer with 2-CHANNEL FEED-THROUGH Passive 70 Volt with LO Pass FilterActive Module with Output for 2 Speakers Active 110 Input Module ControlsActive Input Module Controls NEW / Existing Construction Installation Procedures Mechanical Installation 110TBMechanical Installation 110TB Wire rope detailing Mechanical Installation 110SR Overhead view of pre-installation Cutting drywall using the Rotozip Dimensions 110SR Shipping Weight with Active Module 37 LBS Dimensions 110TB Shipping Weight with Active Module 40 LBSTechnical Specifications Active Module Inquiries@tannoyna.com