Bloomfield WVAE-30F operation manual Burn Hazard HOT OIL Spill

M381 301603 OpM (Supplemental) NFPA Hood

	IMPORTANT!
	VACUUM FITTING
280ºF	DO NOT INSTALL
	DISCHARGE NOZZLE
FUSIBLE LINK
	HERE!

DISCHARGE

NOZZLES

INSIDE OF HOOD
LOOKING UP
INSTALL ON LEFT OR	INSTALL ON RIGHT
SIDE OF HOOD	SIDE OF HOOD
BACK, HORIZ.,	BACK, HORIZ.,
LEFT SIDE,
	RIGHT SIDE
INSTALL (8-1/4”)
	INSTALL (5-3/4”)
CENTER,
VERT. 3”

SIDE, VERT. (6”)

SIDE, HORIZ. (13-1/2”)

MANUAL PULL

STATION PIPING

FRYPOT

FUSIBLE LINK

NOTE

CABLE

ROUTED

UNDER

GUIDE

CRIMP

FERRULE

CLIP

450ºF

FUSIBLE LINK

HEATSINK

DANGER

BURN HAZARD

HOT OIL SPILL

Any additional remote pull station must not be installed on the front or sides of the fryer forward of the ventilator side panels.

Discharge of the fire extinguishing system into hot oil will cause hot foam to spill over from the frypot.

Serious burns and other injuries can result from contact with hot oil and from slipping in spilled oil.

Exclusive Anti-Fire System In the unlikely event that both the temperature control thermostat and hi-limit detector fail, and the oil temperature climbs above the safety limit, the fire suppression system will discharge, cooling the oil below the oil’s (approximately) 540ºF auto-ignition temperature, and preventing a fire from occurring.

9