11. Technical Specifications
Frequency response (1) +/- 3dB | 60Hz - 20kHz |
| |
Recommended Amplifier Power | up to 120 watt / 4 ohm |
| |
Power Handling | Average(2) | Programme Peak (10ms) | |
| 60 watt | 120 watt | 240 watt |
Sensitivity (1) |
|
|
|
2.83 volt @ 1m | 89dB | 92dB (half space) | |
Maximum SPL (3) | Average | Peak |
|
@ 1m | 107dB | 113dB |
|
Transformer (i6T AW ICT) | Max. Insertion loss | 0.9 dB 35Hz – 21kHz +/- 2dB | |
| Primary Taps | 60,30,15, 7.5* watt | |
| Voltage Taps | 70.7V & 100V | |
Impedance | Nominal | 8 ohm |
|
Driver Complement | 6.5” (165mm) full range ICT™ Point Source | ||
Crossover Point | 7 kHz inductively coupled | ||
Enclosure | 11 litre, vented polyethylene | ||
Finish | Black/Grey or White |
| |
Protective Grille | Perforated Aluminium |
| |
Connectors | 2 x 4mm 5way binding posts | ||
| 1 x NL4 speakon |
| |
Fittings | 2 x M8 inserts for Yolk Bracket | ||
| 4 x M6 inserts on rear of cabinet | ||
Dimensions | 344mm (H) x 250mm (W) x 225mm (D) | ||
| 13.54” (H) x 9.84” (W) x 8.86” (D) | ||
Weight | 3.7 Kg (8.1 lbs) |
| |
Shipping Dimensions |
| 400mm (H) x 500mm (W) x 300mm (D) | |
| 15.75” (H) x 19.69” (W) x 11.8” (D) | ||
NOTES:(1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2)Long term power handling capacity as defined in EIA standard RS - 426A.
(3)Unweighted pink noise input, measured at 1m
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.