Final Preparation, Replacement Parts | Bertazzoni CTYK..U7X(2,5)A

valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.45 kPa).

3.Flexible Connections:

a)If the unit is to be installed with flexible couplings and/or quick disconnect fittings, the installer must use a heavy-duty, AGA design-certified commerciai flexible connector of at least 1/2" (1.3 cm) ID NPT (with suitable strain reliefs) in compliance with ANSI Z21.41 and Z21.69 standards.

b)In Canada: CAN 1-6.10-88 metal connectors for gas appliances and CAN 1-6.9 M79 quick disconnect device for use with gas fuel.

CAUTlON: Leak testing of the appliance shall be conducted according to the manufacturer's instructions. Before placing the oven into operation, always check for leaks with a soapy water solution or other acceptable method. DO NOT USE AN OPEN FLAME TO CHECK FOR LEAKS!

PERFORMANCE CHECKLlST

All burners are tested before leaving the factory. There are no adjustments for the burners if connected according to the information on the rating plate. Check each burner for proper operations. Flames should be blue in all settings. If service is required, contact your dealer for the name of their authorized servi ce agency. Gas conversions and initial installation are not the responsibility of the manufacturer.

The installer should carry out the following performance checks. Refer to instructions below.

1.Check surface burner ignition.

2.Check low flame adjustment – surface burner valve center stem adjustment.

3.Check for gas leaks (odors) at ali gas connections.

FINAL PREPARATION

1.Some stainless steel parts may have a plastic protective wrap which must be removed. The interior of the oven should be washed thoroughly with hot. soapy water to remove film residues and any installation dust or debris before being used for food preparation, then rinsed and wiped dry. Solutions stronger than soap and water are rarely needed.

2.Ali stainless steel body parts should be wiped with hot, soapy water and with a liquid deaner designed for this materia!. If buildup occurs, do not use steel wool. abrasive cloths, cleaners, or powders! If it is necessary to scrape stainless steel to remove encrusted materials, soak with hot, wet cloths to loosen the material, then use a wood or nylon scraper. Do not use a metal knife, spatula, or any other metal tool to scrape stainless steel! Scratches are almost impossible to remove.

NOTE: These installation instructions should remain with the unit for future reference. The electrical diagram is located in the backside or the ccoker

REPLACEMENT PARTS

Only authorized replacement parts may be used in performing service on the appliance. Replacement parts are available from factory authorized parts distributors.

CONVERSIONE TO DIFFERENT TYPES OF GAS

Before carrying out any maintenance work, disconnect the appliance from the gas and electric supply. For Natural Gas fit regulator assembly described in Fig.

Adaptation of the pressure regulator for use with different type of gas

The pressure regulator supplied with the appliance is a convertible type pressure regulator for use with Natural Gas at a nominal outlet pressure of 4” w.c. or LP gas at a nominal outlet pressure of 11” w.c. and it is pre-arranged from the factory to operate with one of these gas/pressure as indicated in the pre-arranging labels affixed on the appliance, package and Instruction booklet.

To convert the regulator for use with the other gas different from which one it is pre-arranged it is enough perform the following operations:

1)Unscrew by hand the upper metal stopper of the regulator.

2)Unscrew by hand the white plastic piece screwed under the above mentioned metal stopper, afterward screw it again in opposite way under the metal stopper (for gas reference see the written “LP” and “NAT” with relative indicating arrows on the white piece).

3)Screw again by hand the metal stopper in the original position on the regulator.

Operating in this way the gas regulator is converted for use with the other gas/pressure.

CTYK..U7X(2,5)A specifications

The Bertazzoni CTYK.U7X(2,5)A is a stunning addition to any modern kitchen, offering a perfect blend of style, performance, and innovative technology. This freestanding range exemplifies Bertazzoni's commitment to craftsmanship and design, bringing an Italian touch to culinary experiences.

One of the primary features of the CTYK.U7X(2,5)A is its striking aesthetic. The sleek stainless steel finish not only enhances durability but also adds a contemporary flair that complements various kitchen decors. The professional-grade knobs are ergonomically designed for ease of use while providing that restaurant-quality feel at home.

The range is equipped with a powerful gas cooktop featuring multiple burners, including ultra-high BTU options. This allows for a diverse range of cooking techniques, from rapid boiling to gentle simmering, accommodating everything from simple weeknight dinners to gourmet meal preparations. Additionally, the cast-iron grates ensure excellent heat retention and stability for cookware, making the cooking process smooth and efficient.

The CTYK.U7X(2,5)A also features a spacious electric oven with multiple cooking modes, including conventional, convection, and broil functions. These modes utilize advanced heat distribution technology to ensure consistent cooking results. The convection feature, in particular, promotes even heat circulation, allowing for perfectly baked goods every time. The oven is also equipped with an integrated temperature probe, providing precise monitoring of food without the need to open the door, ensuring optimal cooking conditions.

Another notable characteristic of this Bertazzoni range is its emphasis on energy efficiency. With its advanced insulation and smart heating elements, the CTYK.U7X(2,5)A minimizes energy consumption while maximizing thermal performance. This not only helps reduce utility bills but also reflects a growing trend towards sustainable cooking solutions.

Moreover, the self-cleaning function simplifies maintenance, allowing users to spend less time on cleanup and more time enjoying delicious meals. The intuitive control panel enhances user experience by providing easy access to settings and cooking modes, making the range accessible for cooks of all skill levels.

In summary, the Bertazzoni CTYK.U7X(2,5)A combines high-end design and advanced cooking technologies to elevate the culinary experience. With its powerful cooktop, versatile electric oven, and thoughtful features, it stands out as a premier choice for anyone looking to enhance their kitchen functionality and aesthetics. This range not only meets the demands of modern cooking but does so with elegance and sophistication, making it a true centerpiece in any kitchen.