Service & maintenance instructions

Regulation of burners

Regulation of the "MINIMUM" on the burners

To regulate the minimum on the burners carry out the following procedure indicated below:

1)Turn on the burner and put the knob onto position MINIMUM ( small flame ).

2)Remove the knob ( Fig. 7) of the tap which is set for standard pressure. The knob is found on the bar of the tap itself.

3)Beside the tap bar on the work top, insert a small slotted screwdriver into the hole on the vale rod (Fig. 7) and turn the choke screw to the right or left until the flame of the burner is regulated in the most suitable way to MINIMUM.

4)Make sure that that the flame does not go out when changing the position quickly from MAXIMUM to the MINIMUM position.

ATTENTION: The regulation described above can be carried out only with burners using natural gas, while with burners using propane gas the screw must be fully screwed in, in a clockwise direction.

Adaptation of the pressure regulator for use with different type of gas

The pressure regulator supplied with the appliance is a convertible type pressure regulator for use with Natural Gas at a nominal outlet pressure of 4” w.c. or LP gas at a nominal outlet pressure of 11” w.c. and it is pre-arranged from the factory to operate with one of these gas/pressure as indicated in the pre-arranging labels affixed on the appliance, package and Instruction booklet.

To convert the regulator for use with the other gas different from which one it is pre-arranged it is enough perform the following operations:

1)Unscrew by hand the upper metal stopper of the regulator (Fig. 5A).

2)Unscrew by hand the white plastic piece screwed under the above mentioned metal stopper, afterward screw it again in opposite way under the metal stopper (for gas reference see the written “LP” and “NAT” with relative indicating arrows on the white piece).

3)Screw again by hand the metal stopper in the original position on the regulator.

Operating in this way the gas regulator is converted for use with the other gas/pressure.

Service and maintenance only to be carried out by an authorised person

To replace parts such as burners, valves and electric components, the hotplate must be removed from the bench top by releasing the attachment hooks, loosening the attachment screws of each burner, unscrewing the hotplate attachments nuts which are visible at the bottom of the surface, removing the hotplate top and finally replacing the defective parts.

Note: if the valves must be replaced, first disassemble the ignitions switches wires.

It is recommended to replace the valve gaskets each time the valve is replaced, thus ensuring a perfect seal between the body and the gas train.

WARNING: Disconnect power before servicing unit.

For the location of the wall receptable for the connection of the three-pin earthed plug of the appliance, see indications given in Fig. 1- 2

WARNING: After first installation of the appliance or after any service intervention concerning main gas parts of the appliance, make the leak test using water with soap on the gas connections in order to verify the correct installation. Do not use fire for gas leak testing.

P24400X specifications

The Bertazzoni P24400X is a premium Italian-built gas range that epitomizes high performance and elegant design. This model is ideal for cooking enthusiasts who seek professional-grade capabilities in their kitchen. With its impressive features, this range not only enhances functionality but also elevates the overall aesthetic of any cooking space.

One of the standout features of the Bertazzoni P24400X is its powerful gas burners. The range is equipped with four sealed gas burners, which provide a variety of heat outputs, from a gentle simmer to rapid boiling. The burners are designed to deliver even heat distribution, ensuring that culinary creations are cooked to perfection. The innovative design of the burners also makes them easy to clean, maintaining the pristine appearance of the range.

Incorporating Bertazzoni's commitment to precision, this range includes high-efficiency burners that significantly reduce cooking times. The ergonomic control knobs provide precise temperature adjustments, allowing chefs to fine-tune their cooking methods for optimal results. This level of control is essential for achieving restaurant-quality dishes at home.

The Bertazzoni P24400X features a spacious oven with a generous capacity, which is perfect for preparing multiple dishes simultaneously. The oven uses a convection cooking system that distributes heat evenly, resulting in perfectly baked goods and evenly roasted meats. The range also includes a large viewing window and an internal light, making it easy to monitor cooking progress without opening the door and disrupting the heat.

Safety is a primary consideration in the design of the Bertazzoni P24400X. The oven is equipped with a flame failure device that automatically cuts off the gas supply if the flame goes out, providing peace of mind during cooking. In addition, the continuous cast-iron grates ensure stability and allow for smooth transitions between burners, accommodating various pot sizes without the need for repositioning.

Furthermore, the stylish stainless-steel finish not only grants the range a modern look but also ensures durability and resistance to scratches and stains. Its sleek design is complemented by elegant lines and a minimalist profile, effortlessly fitting into any kitchen decor.

In summary, the Bertazzoni P24400X is a fusion of advanced technology, safety, and Italian craftsmanship. Its powerful burners, capacious convection oven, and focus on user-friendly features make it an exceptional choice for homeowners who value aesthetics and performance in their kitchen appliances. Investing in this range means embracing a culinary experience marked by efficiency, elegance, and excellence.