Waterford Precision Cycles Built-in 70, Built-in 30 manual Electrical Connection Warning

Page 5

WARNING & SAFETY INFORMATION

Please read this manual carefully; it provides important information about the safety, installation use and maintenance of the appliance. This appliance must only be used for the purpose of which it is designed: stor- ing deep frozen food and freezing fresh food. Any other use must be considered improper and thus danger- ous. The manufacturer cannot be considered responsible for any damage caused by improper, incorrect or unreasonable use.

This appliance contains Isobutane (R600a), an environmentally friendly coolant which does not damage the ozone layer and does not increase the greenhouse effect. It is however flammable and as such, care must be taken during transportation to ensure no parts of the cooling system are damaged. In the event of any damage:

-disconnect the mains lead from wall socked

-avoid anything which creates a spark

-air the room in which the appliance is located for several minutes (to ensure there is no gas build up, there should be at least 1m3 of room space for every 8g of coolant).

-contact a qualified technician as soon as possible

The use of this environmentally friendly coolant has led to a slight increase in noise level. In addition to the noise of the compressor, the coolant flowing around the system may be heard. This is unavoidable, but does not affect the performance to the appliance.

*This appliance must be properly installed in accordance with the Installation Instructions before it is used.

*Do not allow children to climb, stand or hang on the shelves in the refrigerator chamber. They could seriously injure themselves and damage the refrigerator.

*Once in operation, do not touch the cold surface in the refrigerator compartment, particularly when hands are damp or wet. Skin may adhere to these extremely cold surfaces.

*Do not refreeze thawed or partially thawed food unless it has been cooked.

*When cooling drinks quickly in the freezer, make sure bottles are not left in for more than one hour as they could burst.

*Do not use sharp edged objects to remove frost and ice.

*Never place electric heaters or candles in the appliance to defrost it. These can damage the plastic parts.

*Do not use defrosting sprays or de-icers as they might contain substances which could damage the plastic parts or which could cause the build-up of gasses and pose a danger to health.

*Do not use a steam cleaner machine to defrost or clean the appliance, pressurised steam could reach the electrical components and cause a short circuit.

*Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this appliance.

*Unplug the appliance before cleaning and making repairs. Note: We strongly recommend that any servicing be performed by a qualified technician.

Electrical Connection Warning

*The appliance should always be plugged into its own individual electrical outlet which has a voltage rating of 230V ~ 50hz.

*The appliance must be grounded. If in any doubt, have the wall outlet and circuit checked by a qualified electrician.

*Do not connect the appliance to the mains electricity supply by an extension lead. If an extension cord is necessary, make sure it is a cord with protection pin and safety certificate.

*The appliance is only completely isolated from the electricity supply when it has been switched off at the wall socket and the plug has been withdrawn.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Fridge Freezer Table of Contents Page Disposal of Old Appliance Caring for the EnvironmentDisposal Of The Packing Material Electrical Connection Warning Product Description Refrigerator AccessoriesFeatures Product Characteristics Technical DataDimension for Transport DimensionFridge Door Freezer DoorPage To remove shelves Glass ShelvesTo replace shelves Bottle HolderTemperature Control Using the Refrigerator EfficientlyStorage Zones In The Refrigerator Food That Should Not Be Stored In a RefrigeratorMaximum Freezing Capacity Using the Freezer EfficientlyStoring Frozen Food Home FreezingSuitable packing material PackingFreeze Food in portions Close the packaging tightlyManual defrosting and cleaning of freezer chamber Manual defrosting and cleaning of refrigerator chamberAfter Cleaning Door SealsChanging the Door Hinges Manufactured by Warranty

Built-in 70, Built-in 30 specifications

Waterford Precision Cycles has long been a name synonymous with high-quality, handcrafted bicycles. Among their impressive lineup, the Waterford Built-in 70 and Built-in 30 models stand out for their engineering excellence and attention to detail.

The Built-in 70 is designed for cyclists who seek a perfect blend of performance and comfort. Its frame is crafted from advanced steel tubing, providing a balance of rigidity and flex that offers a smooth ride, even on rough terrain. The geometry is optimized for endurance, making it ideal for long-distance rides. The Built-in 70 features a full complement of braze-ons for fenders and racks, allowing riders to equip their bike for commuting or touring with maximum versatility.

In contrast, the Built-in 30 is designed with a more agile geometry for swift handling and responsiveness. This model prioritizes speed and efficiency, making it the perfect choice for competitive cycling enthusiasts. The lightweight frame and optimized tubing ensure that every pedal stroke translates into speed on the road. Like its sibling, the Built-in 30 comes with various customization options, allowing riders to tailor it to their specific needs and preferences.

One of the standout technologies incorporated into both models is the use of advanced TIG welding techniques. This method not only enhances the structural integrity of the frames but also results in an aesthetically pleasing finish. Waterford’s commitment to craftsmanship is evident in every weld and joint, reflecting their years of experience in bicycle manufacturing.

Both models also offer personalized sizing through Waterford's custom fit service. This ensures that every rider, regardless of their unique body dimensions, can find a bike that fits them perfectly, enhancing comfort and performance.

Additionally, the Built-in 70 and Built-in 30 are equipped with high-quality components from trusted brands, ensuring an unparalleled riding experience. Options like precision gear systems and lightweight wheelsets further enhance the overall performance of these bikes.

In conclusion, the Waterford Precision Cycles Built-in 70 and Built-in 30 represent the pinnacle of handcrafted cycling performance. Their unique combination of comfort, speed, and customization makes them ideal choices for cyclists of all levels, whether they are taking on long rides or racing against the clock. Investing in a Waterford bike is not just a purchase; it is an investment in quality, performance, and timeless craftsmanship.
Top Page Image Contents