8
FEATURES & CONTROLS
CONTROLS: FILTER CLEAN INDICATOR (Metal Filters)
Filter Clean Reminder (Standard Metal Filters fitted)
Whether your hood is installed as an Exhaust or Purifying unit, a set of metal filters are fitted by the factory. These Metal Filters are intended to filter out residue from cooking. It need not be replaced on a regular basis but are required to be kept clean. The Filter Clean Reminder function in the microprocessor will automatically indicate by a flashing
when the metal filters are needed to be cleaned after every 30 hrs. of use. Filters can be cleaned by hand or in a dishwasher with
Filter Clean Reminder:
When 
flashes on display, the metal
filters installed are required to be cleaned. This will occur after every 30 hours of use.
Re-setting Function:
Reset the Filter Clean Reminder timer when filters are cleaned and
and hold 
for approx. 5 seconds, the display will appear; hold for approximately
5 seconds until | on display disappears |
.The Filter Clean Reminder function is now
Clean Filters
display <A> flashes
To Reset
hold 5 secs. | display from <C> to < > | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|