Air King VAL30AB, VAL36AB manual Supply from home, Hot Black Or Bare Neutral White

Page 3

Supply from home

Hot (Black)

Neutral (White)

 

Ground (Green or Bare)

 

Hot (Black)

or Bare)

 

 

Neutral (White)

Ground (Green

Wire

 

Compartment

 

 

 

From Hood

 

Figure 4

 

 

B

B

A

A

Figure 6

 

NOTE: If the top chimney section (included) will be installed, slide the top section inside of the bottom section at this point.

3.Slide chimney in place so top tabs of the chimney are secured in place on the indents of the vertical chimney bracket and the backside of the chimney fits between the hood and the wall with the bottom tabs overlapping the back lip of the hood (Figure 7).

SECTION 5

Attaching the Chimney

1.Mark the location for the vertical chimney bracket: If using the upper chimney section: 9-3/4"

If not using upper chimney section: 15-3/4"

2.If installing onto drywall, drill holes into wall using a 3/16" drill bit. Install wall anchors

into the drilled holes (one for each hole). Secure bracket into place with (2) provided #6 x 1" screws. If installing into other material (brick, cement, plaster, etc.) choose an appropriate fastner capable of supporting the weight of the chimney (Figure 5).

Figure 7

Details of duct collar, ducting, and electrical have been omitted from drawing for clarity purposes.

Side View

Vertical Chimney

Bracket

9-3/4"

or

15-3/4"

4.To install the upper section, mark the location of the included horizontal mounting bracket using the bracket as a template. Make sure the bracket is level and in line with the bottom section. The height will be dependent on your installation require- ments. Make sure the slots in the side of the chimney will match the holes in the mounting bracket. If installing onto drywall, drill holes into wall using a 3/16" drill bit. Install wall anchors into the drilled holes (one for each hole). Secure bracket into

place with (2) provided #6 x 1" screws. If installing into other material (brick, cement, plaster, etc.) choose an appropriate fastner capable of supporting the weight of the chimney (Figure 8).

Mounting

Bracket

Figure 5

Details of duct collar, ducting, and electrical have

been omitted from drawing for clarity purposes.

3.Press in appropriate tabs on lower chimney section (section with vent holes). If using the upper chimney, press in tabs in middle of the chimney (Position A), other- wise press in tabs at top of the chimney (Position B). Press in tabs at the bottom of the chimney so there is approximately 1/4" of clearance (Figure 6).

Figure 8

6728025 Rev. E 7-10

www.airkinglimited.com

3 of 12

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Retain Instructions for Future Reference Important Instructions Operating ManualUpp er Keyholes SectionSide View Ducting Duct Collar HoodVertical Chimney Bracket 15-3/4 Supply from homeHot Black Hot Black Or Bare Neutral WhiteFilter Troubleshooting GuideCustomer Service Limited Warranty6728025 Rev. E Conserver CES Instructions Pour Références Futures Instrucciones Importantes Manual DE OperaciónVue LatéraleConduit Collet de conduit Hotte TrousSupport de Cheminée verticale 4 po 15-3/4 po Alimentation de la résidenceVivant noir Vivant noir Ou nu Neutre blancFiltre Guide de dépannageGarantie Limitée Service À LA Clientèle6728025 Rev. E

VAL30AB, VAL30, VAL36, VAL36AB specifications

The Air King VAL series, consisting of the VAL30, VAL30AB, VAL36, and VAL36AB, offers high-quality ventilation solutions designed for both residential and commercial applications. These ventilators are engineered with cutting-edge features and technologies to ensure efficient airflow and outstanding performance.

The VAL30 and VAL36 models feature energy-efficient motors that provide powerful ventilation while minimizing energy consumption. Each model comes equipped with a durable, corrosion-resistant steel housing that contributes to longevity and reliability. The VAL30 has an airflow capacity of up to 150 CFM, making it ideal for smaller spaces such as bathrooms or utility rooms. In contrast, the VAL36 pushes airflow up to 250 CFM, suited for larger areas requiring more robust ventilation.

The addition of the "AB" in the VAL30AB and VAL36AB signifies the inclusion of a built-in motion sensor. This innovative technology detects movement within the room, automatically activating the fan when someone enters and turning it off after a set period of inactivity. This feature not only enhances convenience but also aids in energy conservation, further increasing the efficiency of the ventilation system.

The VAL series also emphasizes noise reduction, incorporating sound-dampening technologies to ensure quiet operation. With sound ratings as low as 1.5 sones, these ventilators deliver effective airflow without the disruptive noise that is often associated with traditional fans. This makes them an ideal choice for spaces where a peaceful environment is paramount.

Installation is simplified with the VAL series, as both models come with a removable, easy-to-clean filter that can be accessed without tools. This feature promotes maintenance efficiency, allowing users to keep their ventilation systems in optimal condition.

The sleek and modern design of the VAL30, VAL30AB, VAL36, and VAL36AB ensures that they seamlessly blend into various decors while providing practicality and ease of use. The combination of advanced technologies, energy efficiency, and user-friendly design makes the Air King VAL series a top choice for those seeking effective ventilation solutions that meet contemporary demands. Whether for home or business, these models stand out for their reliability and performance, making them a worthwhile investment in air quality management.
Top Page Image Contents