Zephyr COK-E42SX, COK-E36SX, COK-E48SX Installation Mounting Height & Clearance, Minimum Duct Size

Page 7

Min 32"-Max 52"

14 1/2"

Min 96"-Max 124”

Min 28"-Max 36"

36"

DUCTING

A minimum of 6” round or 3-1/4 x 10" rectangular duct work must be used to maintain maximum air flow efficiency with the 600 cfm internal blower. A minimum of 10"to 8” round must be used with the 1000 cfm external blower.

Always use rigid type metal duct work only. Flexible ducts could restrict air flow by up to 50%.

Use calculation worksheet to compute total duct work.

ALWAYS, when possible, reduce the number or transitions and turns. If a reducer is used, install a long reducer instead of a pancake reducer. Reduce duct size as far away from opening as possible.

If turns or transitions are required:

Install as far away from opening and as far apart, between 2, as possible.

Minimum mount height between range top to hood bot- tom should be no less than 28".

Maximum mount height should be no higher than 36".

It is important to install the hood at the proper mounting height. Hoods mounted too low could result in heat damage and fire hazard; while hoods mounted too high will be hard to reach and will loose its performance and efficiency.

If available, also refer to range manufacturer's height clearance requirements and recommended hood mounting height above range. Always check your local codes for any differences.

*Minimum ceiling height of 96”. Hood mounted at 28” above cooking surface.

**Maximum ceiling height of 124". Hood mounted at 36" above cooking surface.

Minimum Duct Size:

Round - 6” minimum at 600 cfm Round - 10" to 8” minimum at 1000 cfm Rect angular - 3 1/4” x 10” minimum only if using internal blower at 600 cfm. Using rectangular ductwork will require a transition adapter (not provided, but readily available at most hardware stores).

DAMAGE-SHIPMENT / INSTALLATION:

•Please fully inspect unit for damage before installation.

•If the unit is damaged in shipment , return the unit to the store in which it was bought for repair or replacement.

•If the unit is damaged by the customer , repair or replacement is the responsibility of the customer.

•If the unit is damaged by the installer (if other than the customer), repair of replace ment must be made by arrangement between customer and installer.

Installation - Mounting Height & Clearance

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Use, Care, and Installation Guide Page Ta ble of C ontents InstallationRead and Save These Instructions Important safety NoticeModel COK-ExxS Lis t of M a teria lsDuct pieces Equivalent number Total Ins ta lla tion Ductwork C a lcula tion S heetMinimum Duct Size Installation Mounting Height & ClearanceSome Ducting Options Installation DuctingInstallation Specifications Ins ta lla tion Interna l B lower Installation Internal Blower Ins ta lla tion P repa ring E xterna l B lower Ins ta lla tion P repa ring E xterna l B lower Electrical Warning Installation Preparing HoodIns ta lla tion M ounting Hood Ching Il R a il UtensAtta Lights On/Off/Dim Delay OffBlower On/Off Speed SelectionRe-setting Function Filter Clean ReminderHa nge Indica tor Baffle Filters Surface MaintenanceReplacing Baffle Filters Intena nce Lights Make sure all power is turned off and bulbs are not hotHooting Issue Cause What to doAccessory Description List of Parts and AccessoriesPart Description Part# Warranty

COK-E48SX, COK-E42SX, COK-E36SX specifications

The Zephyr COK-E48SX, COK-E42SX, and COK-E36SX are premium under-cabinet range hoods designed to elevate both functionality and aesthetics in modern kitchens. Each model shares common features but is tailored to accommodate various kitchen sizes and styles, making them ideal for diverse culinary environments.

Starting with the COK-E48SX, this model boasts a sleek 48-inch width, providing ample coverage for larger cooktops. It is equipped with a powerful blower that delivers substantial airflow while maintaining a whisper-quiet operation. The three-speed fan effectively manages different cooking scenarios, allowing for an adaptable cooking experience. The stainless steel finish not only complements contemporary kitchen designs but also offers durability and ease of cleaning.

Next, the COK-E42SX, measuring 42 inches, shares many features with its larger counterpart but is designed for medium-sized cooking areas. It offers easy-to-use electronic controls, ensuring that adjusting the fan speed is both straightforward and efficient. The integrated dishwasher-safe baffle filters help capture grease and odors, minimizing residue and enhancing air quality. This model also incorporates LED lighting, delivering bright illumination over the cooking surface while adding a modern touch.

Finally, the COK-E36SX is a 36-inch model that caters to smaller kitchen spaces without compromising on power or style. Its compact design ensures it fits seamlessly into any cooking layout, while still providing effective ventilation. This model maintains the same high-quality stainless steel construction and efficient baffle filters, ensuring longevity and performance. Additionally, the adjustable fan speeds allow users to tailor the ventilation to their specific needs.

All three models are designed with user-friendliness in mind, featuring easy installation and maintenance. The energy-efficient LED lights provide excellent visibility, while consuming less power, contributing to an eco-friendly kitchen environment. With their stylish designs and advanced technology, the Zephyr COK-E series hoods stand out as indispensable kitchen appliances, balancing performance and elegance in any culinary space. Whether you are a professional chef or an enthusiastic home cook, these range hoods ensure a pleasant cooking experience with efficient ventilation and modern aesthetics.
Top Page Image Contents