www.zephyronline.com
Installation instructions
The glass can be installed either prior to or after in- stallation of the hood. If the hood has not been mounted to the wall, place it on a so- lid work surface.
1. Open the top glass door. See Fig.1
WARNING! Hold the glass to prevent it from falling after the next stage.
2.Undo the (6) wing nuts securing the glass to the panel. Fig.2
3.Remove the glass.
A 
4.Position the glass from the kit on the door panel by sliding it until it touches the rear lip ensu- ring that the pins are within the slots. Fig.3B
B
B
- 2 -