Zephyr AK8100AS manual Mounting Height & Clearance, Vertical Ducting, Horizontal Ducting

Page 8

www.zephyronline.com

– Mounting Height & Clearance

Min 26" - Max 36"

36"

DUCTING

Minimum mount height between range top to hood bottom should be no less than 26”.

Maximum mount height should be no higher than 36”.

It is important to install the hood at the proper mounting height. Hoods mounted too low could result in heat damage and fi re hazard; while hoods mounted too high will be hard to reach and will lose its performance and effi ciency.

If available, also refer range manufacturer’s height clearance requirements and recommended hood mounting height above range.

Vertical Ducting:

6” round minimum

Horizontal Ducting:

N/A

Installation

A minimum of 6” round or 3-1/4” x 10” rectangular duct must be used to maintain maximum air fl ow effi ciency .

Always use rigid type metal ducts only. Flexible ducts could restrict air fl ow by up to 50%.

Also use calculation (on page 5) to compute total available duct run when using elbows, transitions and caps.

ALWAYS, when possible, reduce the number or transitions and turns. If long duct run is required, increase duct size.

If turns or transitions are required; install as far away from hood duct output and as far apart, between the two as possible.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use, Care, and Installation Guide Page Table of Contents InstallationImportant Safety Notice To Reduce the Risk of Range TOP Grease FireOperation List of Materials AK8000AS and AK8100ASInstallation Ducting Calculation Sheet Duct pieces Equivalent number Total Length x usedMounting Height & Clearance DuctingVertical Ducting Horizontal DuctingSome Ducting Options InstallationDucting Options Installation Specifications Cable Lock Installation ElectricalElectrical Installation Installing the Power Pack Cabinet bottom cut-out sizeLights BRIGHT/DIM/OFF Features & Controls Slide ControlsBlower ON/OFF/SPEED Selection Maintenance Cleaning and Installing Filters Surface MaintenanceInstalling Metal Mesh Filter, FIG Metal Mesh and Decorative Mesh FiltersHood Model Qty. to Order AK8000AS ZRC-0100 Maintenance AK8000AS Recirculating KitDuctless Recirculating AK8000AS only Maintenance Lights Replacing Light BulbsIssue Cause What to do TroubleshootingTroubleshooting Procedures for Twister and Tornado List of Parts and Accessories Replacement PartsOptional Accessories DescriptionLimited Warranty

AK8100AS specifications

The Zephyr AK8100AS is an impressive addition to the world of high-performance extractor hoods, designed to elevate kitchen ventilation while enhancing the overall aesthetic appeal of your cooking space. This hood combines advanced technology with robust functionality, making it an ideal choice for both professional chefs and home cooks alike.

One of the standout features of the AK8100AS is its powerful 700 CFM motor, which ensures effective removal of smoke, odors, and grease from your kitchen. Its three-speed fan control allows users to adjust the airflow based on cooking needs, providing flexibility whether you are sautéing vegetables or preparing a multi-course meal. Additionally, the hood is equipped with a quiet mode, making it possible to enjoy conversations without the distractions of loud ventilation.

The AK8100AS employs a stainless steel construction, providing not only a sleek and modern appearance but also enhanced durability and ease of maintenance. This material is resistant to rust and staining, ensuring that the hood maintains its polished look even after extensive use. Its seamless design contributes to an elegant kitchen aesthetic while minimizing the accumulation of grease in hard-to-reach areas.

Another key technology featured in the AK8100AS is the LED lighting system. The hood includes bright, energy-efficient lights that illuminate your cooking surface, allowing for better visibility while preparing meals. This feature not only enhances safety but also creates an inviting atmosphere in the kitchen.

For those concerned about installation, the AK8100AS is designed for easy mounting and fits various ceiling heights, making it versatile for different kitchen designs. The adjustable ducting options allow for both vertical and horizontal installation, providing additional flexibility based on your kitchen layout.

The Zephyr AK8100AS also accommodates a series of electronic controls, ensuring ease of use with touch-sensitive buttons. This feature allows for smooth operation while also adding a modern touch to the appliance. Moreover, it comes with a delay-off feature, which lets the fan continue running for a short period after cooking, ensuring that all air is cleared from the kitchen before shutting off.

In summary, the Zephyr AK8100AS stands out as a powerful, stylish, and functional kitchen accessory. With its robust motor, durable stainless steel design, innovative lighting, and user-friendly controls, it is a top choice for anyone seeking a reliable and efficient ventilation solution. Whether you're an avid cook or simply enjoy entertaining, the AK8100AS is equipped to enhance your culinary experience significantly.
Top Page Image Contents