Installation Considerations | 7 |
Installation Options
STANDARD, RECESSED OR FLUSH INSET INSTALLATION
The warming drawer with E series drawer front can be installed in a standard, recessed or flush inset application.
For a standard installation, the drawer collar and front panel sit proud of the cabinet face frame. A recessed installation requires the cabinetry be recessed by 3/16" (5) so the collar is flush with the cabinet face frame but the drawer front will sit proud. A flush inset installation requires the drawer collar and front panel be recessed to be flush with surrounding cabinetry. Refer to illustrations on the following pages for minimum cabinet dimensions for your specific installation.
INSTALL RECESSED CLEATS AND PLATFORM
For a recessed or flush inset application, you will need to install a recessed platform and cleats into the opening. Proper recess of the platform and cleats is critical to the function and esthetics of the warming drawer installation.
The depth of the platform may increase with the cabinet depth. Be sure to rigidly mount the platform so that it can support a minimum of 200 lbs (90 kg). Refer to the illustrations below.
wolfappliance.com/specs
Mounting holes will need to be drilled in the back of the drawer front panel. Holes should be drilled on site to ensure proper fit and gaps are achieved. A drilling template is provide with the integrated drawer front.
IMPORTANT NOTE: Be sure to finish the inside lip of the opening and the front face of the platform and cleats. These areas may be visible when the drawer is open.
IMPORTANT NOTE: Be aware of the location of the mounting holes on the warming drawer frame to make sure screws used to attach the cleats do not interfere with screw holes for mounting the warming drawer.
|
| OTAEPL C | T |
|
| |
|
| TPLA | MRFO |
|
|
|
|
|
| SIDAEELT | C |
| |
ACLE | TSMNRAOFDTPLA |
|
|
|
| |
EREC | SSDE | 3/16"5( ) |
|
|
|
|
|
|
| ACRITBEN | Y | ||
|
|
| OPE | I | NGN |
|
TOPL CAE T
|
| PLA FT | ORM |
|
| |
|
|
|
| SIDE | TCLEA | |
ACLE | ST DANALP FTRO | M |
|
|
| |
EREDCESS | 3/16"5( | ) |
|
|
| |
| LPSUI HTNKCSSE | I CAB | NET | RY | ||
OFCEDARO | I TEVLENPA | I NOPE |
| NG | ||
Recessed application. | Flush inset application. |