Wolf Appliance Company L462212 S TA L L Filters, Blower a S S E M B L I E S, M Ot E B L O W E R S

Page 14

W O L F P RO V E N T I L AT I O N HOOD LINERS

A C C E S S O R I E S

Optional acces- sories are available through your Wolf dealer. To obtain local dealer information, visit the Locator section of our website, wolfappliance.com.

I N S TA L L FILTERS

Remove all packaging material from the filters.

Install the filters. Orient each filter with lines running vertically. Position the top edge of the filter as shown in the illustra- tion below. While pressing up against the spring, rotate the bottom edge of the filter into position. Gloves should be worn to provide proper grip.

BLOWER A S S E M B L I E S

Wolf Pro ventilation hood liners are shipped without the blower assembly. Wolf internal, in-line and remote blower assemblies are available as sales accessories through your Wolf dealer.

IMPORTANT NOTE: Blower options vary with the cooking surface. Use only a Wolf blower with the Pro ventilation hood liner.

I N T E R N A L B L O W E R S

LBLOWER-120INT (805087) – 1200 CFM internal blower for all Pro hood liners.

I N - L I N E B L O W E R S

BLOWER-110IL (808332) – 1100 CFM in-line blower for all Pro hood liners.

R E M OT E B L O W E R S

BLOWER-90REM (801641) – 900 CFM remote blower for all Pro hood liners.

BLOWER-120REM (801642) – 1200 CFM remote blower for all Pro hood liners.

BLOWER-150REM (804701) – 1500 CFM remote blower for all Pro hood liners.

Refer to the Wolf Design Guide for Pro ventilation recommendations. You can also visit our website at wolfappliance.com.

 

Spring

 

Filter

Grease Cup

SIDE VIEW

Filter installation

14

Image 14
Contents Installation Instructions N TA C T F O R M AT I O N AT I N G P L AT E I N F O R M AT I O N C E S S O R I E S Installation C O N S I D E R AT I O N SS T O F M AT E R I a L S E C T R I C a L R E Q U I R E M E N T SInstallation S P E C I F I C AT I O N S RO H O O D L I N E R SDecorative H O O D S Pro Hood Liners ModelInstallation I N S T R U C T I O N S S TA L L Ductwork L F P RO V E N T I L AT I O N Hood Liners Wall P R E PA R AT I O N Hood Liner P R E PA R AT I O NInstallation I N S T R U C T I O N S Hood Liner P R E PA R AT I O N S TA L L T H E Hood LinerPro hood liner wiring location Installation I N S T R U C T I O N S Internal B L O W E R L O W E R 1 2 0 I N T I N S TA L L AT I O NO W E R I N S TA L L AT I O N L F P RO V E N T I L AT I O N Hood Liners C E S S O R I E SIN-LINEA N D Remote B L O W E R S Dimensions for BLOWER-90REM O W E R W I R I N GT E R N a L B L O W E R S S TA L L FiltersBlower a S S E M B L I E S M OT E B L O W E R STroubles H O OT I N G YO U N E E D Service 0 4 8 0 0