Connections

Please consider the following when set- ting up your new system :

•Before making or changing any connections, ALWAYS make sure that the subwoofer is unplugged from the wall and your other components are turned OFF. Also turn down the volume control of the subwoofer and your preampliﬁer or receiver.

Tape Deck

DVD

Preamplifier

•Whenever possible, keep the power cords away from the signal cables or speaker wires to prevent any hum or interference being heard in the speakers.

•Choose reliable, high quality inter- connect cables, also called patch cords or RCA cables. They should be fully shielded and as short as possible for the job. The longest cable in your system will likely be to the subwoofer, so choose a good quality brand.

•Some patch cords can be a very tight ﬁt and there is usually a preferred method of getting them off. Some have to be removed with a twisting action. Be gentle or you may damage the jacks of the sub- woofer or your other components.

Power strip

Amplifier

AC outlets on the same circuit breaker

Subwoofer

•This diagram shows all the low power components sharing a power strip which is connected to the same outlet used by the ampliﬁer.

•The subwoofer is connected to an outlet on the same circuit breaker, provided that the total system current draw does not exceed the breaker current rating.

•This arrangement will reduce the possibility of an audible hum in your system caused by a ground loop.

Speaker-Level connections

•The subwoofer’s speaker-level inputs can accept speaker wires with banana, dual-banana, bare wire or spade terminals. If you have banana type connectors on your speaker wire, make sure that you tighten the binding posts before inserting.

•Make sure that the negative speaker wires never touch the posi- tive wires as this will short out and possibly damage your ampliﬁer or receiver.

The subwoofer’s two negative posts are joined internally (common- grounded). Your ampliﬁer must also be internally common-grounded or you cannot use this connection. Contact the manufacturer of your ampliﬁer to make sure its outputs are common grounded.

5SERgS -ANUAL		9

Home Theater System specifications

The Sunfire Home Theater System is designed for audiophiles and movie enthusiasts seeking an immersive audio experience in the comfort of their own homes. Known for its engineering excellence, Sunfire products deliver powerful sound while maintaining compact designs, making them suitable for various living spaces.

One of the standout features of the Sunfire Home Theater System is its proprietary subwoofer technology. Sunfire’s subwoofers utilize a unique design that combines high output with a small footprint. The result is deep, rumbling bass that fills the room without overwhelming the space. The patented High Fidelity Bass (HFB) technology ensures that even the lowest frequencies are reproduced with precision, making action movies more thrilling and music more enjoyable.

In addition to powerful subwoofers, the system includes high-performance satellite speakers that provide crisp and clear mid and high frequencies. These speakers often employ advanced materials and construction techniques, enhancing their durability while delivering an unparalleled auditory experience. With a focus on delivering a balanced soundstage, Sunfire speakers ensure that every sound is faithfully reproduced, whether it’s the subtle rustle of leaves or the booming explosions of blockbuster films.

The Sunfire Home Theater System embraces cutting-edge technologies such as Dolby Atmos and DTS:X, enabling a surround sound experience that places you at the center of the action. With support for immersive audio formats, the system creates a three-dimensional sound environment, allowing sounds to move around you in a lifelike manner. This enhances the realism of films and fully immerses you in the audio landscapes of your favorite shows.

Setup and customization are also user-friendly features of the Sunfire Home Theater System. Many models come equipped with advanced calibration technologies that analyze the acoustics of your room and automatically adjust settings for optimal performance. This ensures that every listener enjoys the best possible sound quality, regardless of their seating position.

Additionally, the system's sleek, modern design makes it an attractive addition to any home décor. Available in multiple finishes and styles, Sunfire products blend seamlessly into a living room or dedicated home theater space without compromising on aesthetics.

In conclusion, the Sunfire Home Theater System combines innovative technologies, powerful performance, and elegant design to deliver an exceptional home audio experience. Whether you're watching movies or listening to music, the Sunfire system ensures that you experience every moment in rich, immersive sound.