Sunfire True Subwoofer Signature and Standard Version user manual Contents

Page 3
Contents

15.To Prevent Electric Shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Pour préevenir les chocs électriques ne pas utiliser cette Þche polariseé avec un prolongateur, un prise de courant ou une autre sortie de courant, sauf si les lames peuvent être insérées à fond sans laisser aucune pariie à découvert.

16.Grounding or Polarization — Precau- tions should be taken so that the ground- ing or polarization means of the Com- ponent is not defeated.

This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital ap- paratus as set out in the radio interference regulations of the Canadian Department of Communications.

ATTENTION — Le présent appareil numéri- que n'émet pas de bruits radioélectriques dépassant las limites applicables aux ap- pareils numériques de class A/de class B (selon le cas) prescrites dans le règlement sur le brouillage radioélectrique édicté par les ministere des communications du Canada.

WARNING:THIS SUBWOOFER IS CAPABLE OF PRODUCING VERY HIGH SOUND PRESSURE LEVELS. YOU MUST TAKE EVERY PRECAUTION TO PROTECT YOUR HEARING FROM PERMANENT DAMAGE.

Contents

Safety Instructions

2

Introduction

4

Features

4

Unpacking and Care

4

Overview

5

Control Panel Features

6

Installation

9

Connections

10

Location

11

Room Equalization Procedure

12

System ConÞgurations

14

Adjusting the Controls

18

SpeciÞcations (Signature Edition)

19

SpeciÞcations (Standard Edition)

20

Troubleshooting Guide

21

Limited Warranty

23

Service Assistance

23

To Þnd out more about this and other SunÞre products,

please visit our website: www.sunÞre.com

User's Manual

 

3

 

Image 3
Contents BRIGHT - ON True SubwooferSignature and Standard Edition DIM - STANDBYSafety Instructions Contents Introduction Features UnpackingCare Overview The DriversThe AmpliÞer 2. Crossover Frequency Control Panel FeaturesVolume Phase Control9. Line Fuse 6. Line Level Inputs7. Balanced XLR Input 8. Speaker Level Inputs13. Microphone Input Control Panel Features continued11. Power Switch 12. Start buttonMagnetic Fields InstallationAC Power Considerations Heat riseSpeaker Level connections ConnectionsUsing Two Subwoofers LocationAutomatic EQ Mode Room Equalization ProcedureManual EQ Mode Resetting the EQConnections to a preampliÞer’s subwoofer output System ConÞgurationsConnections to a preampliÞer using Y cables PLIFIER Using the line level high-passoutputsPREAMPLIFIER MAIN OUTPUTSUsing the speaker level inputs Control settings Adjusting the controlsSpeciÞcations Signature Edition SpeciÞcations Standard Edition Troubleshooting Not enough bassNot enough bass in a 5.1 system The subwoofer won’t turn on automatically The subwoofer won’t turn offService Assistance Limited WarrantyManual part number 913-103-00Rev B