American Aldes HRV 700SDD, HRV 700SFD manual Dimensions 700SDD / 700SFD, Warranty

Page 2

PERFORMANCE

OPTIONS AND ACCESSORIES 28 998: 60 MIN. REMOTE TIMER (2 Wire)

28 882 DEHUMIDISTAT - Activates high speed when indoor humidity rises above set point on control (2 Wire)

Note: Manufacturer

WARRANTY

reserves the right to change

Units carry a 15 year warranty on

specifications without notice.

the heat recovery core and a 2

year replacement parts warranty.

All units conform to CSA and UL Standards

SPECIFICATIONS

General: Unit shall be completely wired and includes blowers, filters, heat exchange cores and control panel.

Cabinet: 29 5/8” x 28 3/4” x by 24 5/8” H. Constructed of 20 gauge satin white powder coated galvanized steel (G60) for superior corrosion resistance. Insulated with foil faced fiberglass duct liner to prevent condensation.

Heat Exchange Core: Two modules, aluminum plate heat exchange core assembly held in stainless steel frame.

Air filter: Four washable filters.

Motors: Two efficient three speed PSC double shafted motors 120 V,

2.75Amps each (5.5 Amps total on high speed), 1 ph. 1/10 HP, 1625 RPM. Watts - total on high speed - 648.

Blowers: Centrifugal type rated at 700 CFM (329 L/s) free air delivery. Each air stream has one double shafted motor driving a centrifugal blower. Rubber isolated mounts.

Controls: Illuminated power switch, 3 speed blower control, low voltage (24 VAC) terminals for connection of remote controls and defrost light indicating automatic operation.

Defrost: Model 700SDD: Supply bypass routes indoor air to defrost core.

Model 700SFD: Supply fan shuts off while exhaust contin- ues to defrost core. (Defrost light indicates defrost mode- Preset 27° F (-3°C)).

Duct Connections: Four 14" X 8" (356mm X 200mm). Model 700SDD has fifth 14" x 8" duct connection on top surface.

Drain Connections: Two 1/2" O.D.

Mounting: Unit to be set in support brackets hung by threaded rod type apparatus. (Brackets and rod not provided).

Weight: 142 lbs (64.4 Kg)

Shipping Weight: 167 lbs (75.8 Kg)

Manufacturer: American ALDES Ventilation Corp.

4537 Northgate Court, Sarasota, FL 34234

DIMENSIONS 700SDD / 700SFD

PROJECT

DATE

SUBMITTED BY

CONTRACTOR

 

 

 

 

 

 

 

 

4537 NORTHGATE COURT SARASOTA, FL 34234-2124, USA Tel: 941 • 351- 3441

Fax: 941 • 351- 3442 www.aldes-us.com e-mail: info@aldes-us.com

BY MATHEWS GRAPHIC DESIGN

496HRV4-03

Image 2
Contents Aldes HRV 700SDD Dimensions 700SDD / 700SFD WarrantyHRV 700SDD/700SFD Plus Heat Recovery Ventilator Dimensions P700SDD Options and AccessoriesAldes HRV 850DFD Performance SpecificationsDimensions Aldes HRV 1200SDD Dimensions 1200SDD 1200SFDHRV 1200SFD/1200SDD Plus Aldes HRV P1200SDD P1200SDD HRV 1500IFD HRV 2000SFD Cores AirflowPerformance MotorsAldes HRV 2500SFD 28 883 Commercial Interface Control 28 880 Digital Electronic Timer DET28 881 Programmable Ventilation Side View

HRV 700SFD, HRV 700SDD specifications

The American Aldes HRV 700SFD and HRV 700SDD are advanced heat recovery ventilators designed to enhance indoor air quality while maintaining energy efficiency. These units are ideal for both residential and commercial applications, providing a balanced airflow that promotes a healthier living environment.

One of the main features of the HRV 700SFD and HRV 700SDD is their exceptional heat recovery capability. These ventilators can recover up to 80% of the heat from stale indoor air, transferring it to the incoming fresh air. This process significantly reduces heating and cooling costs, making the units highly economical and environmentally friendly.

These models are equipped with advanced energy-efficient ECM (Electronically Commutated Motor) fans, which provide quiet operation and optimal airflow. The ECM motors adjust their speed automatically according to demand, ensuring that the system operates at peak efficiency without compromising comfort.

The HRV 700SFD features a vertical configuration, making it suitable for tight spaces or applications where ceiling height is limited. On the other hand, the HRV 700SDD is designed with a horizontal configuration, making it an excellent choice for situations where horizontal space is a consideration. Both models allow for easy installation and maintenance, as their thoughtfully engineered design facilitates access to key components.

Furthermore, these heat recovery ventilators include a robust control system that allows for customizable operation. Users can set specific operating modes and schedules, ensuring that the ventilation aligns with their unique lifestyle needs while optimizing energy use. The models come with both wall-mounted and remote control options for added convenience.

The exchange core used in both the HRV 700SFD and HRV 700SDD is made from durable materials that resist moisture and mold growth, ensuring longevity and hygienic performance. Moreover, the units are backed by American Aldes’ commitment to quality, providing peace of mind to consumers.

In summary, the American Aldes HRV 700SFD and HRV 700SDD are outstanding choices for heat recovery ventilation. With their high heat recovery efficiency, advanced ECM motors, versatile configurations, and user-friendly controls, they stand out as practical solutions for achieving superior indoor air quality while reducing energy consumption.