Description of the Appliance
• The hood is supplied as an extractor unit and can also be used with a filtering function
by fitting one charcoal filter.
• You will need an original AEG charcoal filter for this function (Available from your local AEG Service Force Centre).
Extractor version
•In this version fumes are extracted to the outside via a hose connected to the coupling ring A. Fig. 1.
• In order to obtain the best performance the hose should have a diameter equal to the outlet hole.
•Should there already be a pipe of diameter 125 mm that ducts to the outside through the walls or roof, it is possible to use the 150/ 125 mm reduction flange provided. In this case the hood will be slightly noisier.
Filter Version
•The air is filtered through an charcoal filter and returned to the kitchen through the top grill of the outlet pipe.
•You will need an original AEG charcoal filter for the filtering function. (See Special Accessories).
•Fix the deflector using 2 screws Ø 2,9x13 mm. Fig. 2.
•Optionally, the position of the chimney
elements can be changed. When using the hood in the filter version the chimney must be fixed at the top, with the air outlet grill at the side.
Fig. 2
5