Overview, Driver, Ampliﬁer | Sunfire Solitaire 10 manual

Overview

Your Sunﬁre True Subwoofer EQ Soli- tiare is designed to give you the best pos- sible low-frequency sound quality for your Home Theater experience. It incorporates

atremendously powerful built-in ampliﬁer and a single long-throw driver to produce tight, ﬂoor-rumbling, denture-rattling bass that you can feel as well as hear.

The subwoofer is available in two ver- sions, and this manual covers both:

Solitaire 12 is a 13 inch cube, with an output greater than 113 dB peak SPL, 16 Hz to 100 Hz.

Solitaire 10 is an 11 inch cube, with an output greater than 107 dB peak SPL, 18 Hz to 100 Hz.

The subwoofer has an automatic equalization system which will tailor the subwoofer output to compensate for any room effects. It also has a manual equalization mode. An Equalizer Authority control allows you to adjust the amount of automatic equalization, and overide it if required.

The subwoofer has an adjustable high cut ﬁlter and a choice of speaker-level or line-level inputs for easy incorporation into existing systems, or as part of a subwoofer/satellite speaker combination.

Controls for adjusting the volume, crossover frequency and phase, allow the subwoofer to be perfectly matched to any listening environment and audio components.

The Driver

To have lots of bass requires moving lots of air. Your Sunﬁre Subwoofer incor- porates a driver which can move back and forth approximately ﬁve times more than a normal subwoofer. This gives it a lot of air moving capacity which allows for majestic bass performance.

The Ampliﬁer

The large movement range of the driver creates greater air pressure inside the box than a conventional subwoofer. Therefore, the drive ampliﬁer must be much more powerful than an ordinary subwoofer ampliﬁer. In fact, it has to be so powerful, it is almost hard to believe.

The power ampliﬁer within the Solitaire 12 Subwoofer is capable of delivering over 1,500 watts into a 3.3 ohm resistor (the driver voice coil resistance). The Solitaire 10 is capable of delivering 1,250 watts. When the same full output is ap- plied to the driver, however, the enor- mous back-electromotive force generated as a consequence of its large motion and giant magnet, causes the current ﬂow to be much less than if it were a 3.3 ohm resistor. It is this singular property of the driver that allows the subwoofer to be ap- proximately ten times more efﬁcient than a subwoofer this size would normally be.

A compressor circuit kicks in automati- cally if the input signal level reaches a level that would overload the driver. This maintains a ceiling on the output without clipping. If the input signal is driven even further, a ‘soft clipping’ circuit is enabled. This allows the subwoofer to put more sound into the room to satiate the power hungry user, but without distortion or damage to the subwoofer. Thus, for ex- plosive scenes in movies, this produces extremely high sound pressure levels (SPL) in your room without the drivers banging against the mechanical stops.

For more details of the subwoofer de- sign, please call us or view our website: www.sunﬁre.com.

5SERgS -ANUAL		5

Solitaire 10 specifications

Sunfire Solitaire 10: A Benchmark in High-Performance Audiophile Speakers

The Sunfire Solitaire 10 is a standout innovation in the world of audiophile-grade speakers, marrying advanced technology with exceptional sound quality. Designed by renowned audio engineer Bob Carver, Sunfire has a reputation for producing speakers that deliver powerful, immersive audio experiences. This model continues that legacy with its unique features and characteristics.

One of the standout features of the Sunfire Solitaire 10 is its proprietary "High Definition" technology, which ensures a balanced and accurate audio reproduction across a wide frequency range. This technology minimizes distortion and maximizes clarity, making every note and lyric crisp and precise. The speaker adeptly handles dynamic music genres, providing an emotional depth that is particularly appealing to discerning listeners.

The Solitaire 10 is equipped with a 10-inch high-excursion subwoofer that delivers deep bass without compromising detail in higher frequencies. This subwoofer provides robust low-end performance, allowing users to feel the impact of the music as if they were in a live concert environment. The carefully designed cabinet structure minimizes resonance, ensuring that sound remains clear and undistorted even at high volumes.

Incorporating advanced materials like aluminum and high-density MDF, the Solitaire 10 is built to last while minimizing unwanted vibrations. The cabinet’s construction employs an innovative bracing system that further enhances its acoustic performance, providing a stable platform for sound to travel unimpeded.

Connectivity is made easy with the inclusion of multiple input options, including standard speaker wire connections and binding posts, which allow for versatile setups. This flexibility ensures compatibility with various amplifiers and home theater systems.

The aesthetic design of the Sunfire Solitaire 10 reflects its high-performance capabilities. With a sleek, modern look, the speaker can seamlessly integrate into any living space. The premium finish and attention to detail make it as visually appealing as it is sonically impressive.

In conclusion, the Sunfire Solitaire 10 stands as a commendable achievement in speaker technology, featuring high-definition sound, powerful bass response, durable construction, and attractive design. It’s an ideal choice for audiophiles and casual listeners alike who seek an outstanding listening experience that truly encapsulates the essence of their favorite music. Whether in a dedicated listening room or part of a home theater setup, the Sunfire Solitaire 10 is poised to elevate any audio experience to new heights.