NuTone ZN110HL specifications Features

Page 1

SPECIFICATION SHEET

MODEL ZN110HL

VENTILATION FAN

WITH LIGHT

FEATURES

UltraGreen™ Energy Saving DC Motor

DC motor for efficiency well beyond ENERGY STAR® requirements.

Multi-speed capability ideal for meeting ASHRAE 62.2, LEED and ENERGY STAR® for Homes requirements. Can be used to comply with CA Title 24, as well as local/spot ventilation needs.

UltraSilent™ Sound Technology

HVI certified, best-achievable <0.3 Sone level provides nearly silent operation for a relaxing environment.

State-of-the-art blower and duct outlet design smooths airflow.

High tech DC motor designed for nearly silent operation.

UltraSmart™ Control Technology

Powerful operation maintained over a wide range of real-world installations (CFM ratings maintained through at least 0.25” static pressure).

Infinitely adjustable low cfm setting allows precise adjustment to prevent over-ventilating and maximize efficiency.

Adjustable time delay sets how long fan will run on high speed before returning to a continuous lower speed.

UltraLucent™ Lighting Technology

Two, ENERGY STAR® qualified 18 watt (max) GU24, 3500K bulbs brightly illuminate room for most any task (bulbs included).

One, 4 watt (max) C7 type night-light provides night-time convenience (bulb not included).

Well-diffused, wide light dispersal floods room for maximum effectiveness and keeps bulbs from showing through lens.

Enclosed reflector for minimal light visiblity through the grille.

UltraQuick™ Installation Technology

Unique telescoping mounting frame fits through retrofit drywall opening to allow easy installation from the room side. No attic access needed!

Captive screws allow for easy new construction installation.

Mounting frame positioning tabs provide easy vertical positioning for new construction.

Easy to insert and remove snap-in housing. No screws required!

Easy to insert and remove snap-in blower.

Inside or outside duct connector and knockout plate mounting provides flexibility for new construction or retrofit.

UltraSense™ Humidity Sensing Technology

Detects humidity at the ceiling where it is greatest, which minimizes reaction time.

Automatically switches fan to maximum airflow (CFM) when either of these conditions is detected:

-Rapid to moderate humidity increase;

-Humidity above set point (50%-80% RH).

Humidity level is set with easily accessible user adjustment.

Can be used to comply with CALGreen standards.

Two wire manual operation for odor control - Boosts fan to maximum airflow (CFM) when power line through wall switch is cycled ON, OFF and back ON.

After humidity has stabilized and is below set point or after boosted through power line cycling, fan operates at maximum airflow (CFM) until UltraSmart™ user adjustable (5 to 60 minutes) time delay set point is reached then fan reduces to continuous airflow (CFM) level.

U.L. Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling mount only).

U.L. Listed for use in insulated ceilings (Type IC).

3-year warranty on product, 1-year warranty on bulbs.

DIMENSIONS (Inches)

SPANS 14 TO

24 ON-CENTER

FRAMING

 

Broan-NuTone LLC

Hartford, Wisconsin

www.nutone.com 888-336-3948

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REFERENCE

QTY.

 

REMARKS

 

Project

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Location

 

 

 

 

 

 

 

 

Architect

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Engineer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contractor

 

 

 

 

 

 

 

 

Submitted by

Date

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21J

 

99044925B

Image 1
Contents Features Electrical HVI Performance WeightFAN Capability