NuTone specifications Power Attic Ventilator, Model RF-79RP

Page 1

Architectural & Engineering Specifications

August 2001

Exterior-Mounted

Power Attic Ventilator

with Automatic Thermostat

MODEL: RF-79RP

DESCRIPTION

Pulls hot air out of larger attics automatically. Exhausts moisture and condensation that can cause premature deterioration of attic insulation, shingles, roof, rafters,

wiring and outside paint.

• Efficient PSC type motor.

Trim silhouette with 22" diameter by 9" high housing.

23" square, aluminum, one-piece self-flashing flange and venturi design provide complete rain seal. Includes birdguard.

• Polymeric dome is UV protected.

Automatic thermostat turns the fan on at selected temperature setting from 60°F to 120°F or, may be used with a general use On/Off switch for manual control.

1412" diameter roof cutout between rafters. Install on flat or pitched roof. When used on flat roofs, fan should be mounted on built-up curb so that unit is raised above standing water level.

DESIGN FEATURES

Air Delivery: 1400 CFM at .03" S.P. 2000 sq. ft. attic floor area.

Dimensions: 9" high, dome 22" diameter, 23" square flashing plate.

Motor:PSC type, sleeve bearing, thermally protected (auto-reset with one-shot fuse backup protector).

Material & Finish: Flashplate is plated steel with brown, powder coat paint finish. Dome is dark gray, UV protected, polymeric material. Bird guard is UV protected polymeric material.

Fan Blade: 5 Fins, 14" diameter, 4" pitch, galvanized steel.

Thermostat: Adjustable from 60° to 120°F. Preset to 110°F.

Electrical Rating: 120V, 60Hz, 3.9A.

CERTIFIED TEST DATA

Air delivery rating is certified by the Home Ventilating Institute Division of AMCA, based on testing performed by an independent third party testing laboratory, in accordance with HVI standards. This NuTone model

is listed by Underwriters' Laboratories Inc.

ARCHITECT'S SPECIFICATIONS

Attic Cooling Fan shall be Model RF-79RP as manufactured by NuTone, according to product specifications listed: 9" high, dome 22" diameter, flashing 23" square; contains automatic, adjustable thermostat; 1400 CFM at .03" S.P.

Image 1
Contents Model RF-79RP Power Attic VentilatorSelection Data Installation

RF-79RP specifications

The NuTone RF-79RP is an innovative solution in the realm of home ventilation and air quality control. Designed with the modern consumer in mind, this powerful ceiling-mounted exhaust fan combines efficiency with advanced technology, ensuring that your home remains fresh and breathable.

One of the standout features of the RF-79RP is its ultra-quiet operation. Equipped with a powerful motor, it provides an impressive airflow capacity of 90 CFM while maintaining noise levels as low as 1.5 sones. This means that homeowners can enjoy superior air circulation without the disruptive sounds typically associated with exhaust fans. The RF-79RP is particularly suitable for bathrooms, kitchens, and laundry rooms, where humidity and odors are prevalent.

The fan’s design is sleek and unobtrusive, allowing it to blend seamlessly into any interior decor. Its white polymeric grille provides a clean look, while also being easy to install and maintain. The built-in duct adapter simplifies the installation process, enabling a quick connection to 4-inch ducts, thus saving time and effort during setup.

The RF-79RP also incorporates advanced safety features. It is designed to protect against overheating, ensuring that it operates safely even during prolonged use. The easy-to-use rocker switch makes operation straightforward, allowing for simplicity in everyday use.

Another key characteristic of the NuTone RF-79RP is its energy efficiency. As an ENERGY STAR® certified product, it meets strict energy efficiency guidelines, helping homeowners to reduce energy consumption and lower their utility bills. This makes it not just a smart choice for air quality, but also for energy-savvy consumers looking to make environmentally friendly decisions.

Installation options are versatile, as this fan can be mounted in both new construction and retrofit applications. Its compact size allows for placement in tight spaces, making it a suitable choice for any home layout.

In summary, the NuTone RF-79RP is a high-performance exhaust fan that combines quiet operation, energy efficiency, and user-friendly design. With its superior airflow capabilities and advanced safety features, it stands out as a reliable and efficient option for enhancing indoor air quality. Whether in a bathroom, kitchen, or laundry room, the RF-79RP is equipped to meet the ventilation needs of any modern household, while providing peace of mind and comfort to its users.