NuTone WA6500 Wiring Connections, Lamp Installing Or Replacement, Filter Installation Replacement

Page 4

WIRING CONNECTIONS

All wiring connections must comply with local codes and the unit must be properly grounded.

1.Make sure box connector is secure.

2.Refer to FIGURE 8. Make wiring connections.

3.Replace electrical box cover and secure with screw.

LAMP INSTALLING

OR REPLACEMENT

1.Depress sides of light diffuser until tabs of diffuser disengage from slots in hood. Remove diffuser.

2.Install (2) 40 watt maximum, Type A-15 appliance bulbs.

3.Replace difuser in hood by depressing sides and engaging tabs in slots in hood.

FILTER INSTALLATION

AND REPLACEMENT

1.For ducted operation, install the aluminum mesh filter. For non- duct operation, install the non-ducted filter (Model WA65F, sold separately).

2.Refer to FIGURE 9. The filter slides into channels at the back of the hood, on either side of the fan compartment, and snaps under the spring clips near the front of the fan compartment.

MAINTENANCE

FILTERS

IMPORTANT: The aluminum filter should be removed once monthly and washed in hot detergent water. Rinse in clear, warm water and shake off excess moisture before replacing. The filter may also be cleaned in your dishwasher.

IN A NON-DUCTED INSTALLATION: Replace filter every 3-6 months as needed.

CLEANING

The hood should be wiped off occasionally both inside and outside using warm water, mild dish detergent and a soft cloth. Never use scouring powders, steel wool pads or any other abrasive cleaners which will destroy the hood’s finish.

REPLACEMENT PARTS

Should replacement parts be required, please indicate hood model number and appropriate part number. Contact your NuTone dealer or write to NuTone:

Attn: Parts Department

NuTone, Inc.

4820 Red Bank Road

Cincinnati, OH 45227-1599

HOODWIRING

WHT

OR BARE

SUPPLYWIRING

 

WHT

 

 

BLK

BLK

 

 

GREEN GROUND

GREEN

 

 

SCREW

 

 

 

(GROUND)

 

FIGURE 8

FIGURE 9

4

Image 4
Contents Important Safety Instructions Plan the InstallationTo Reduce the Risk of a Range TOP Grease Fire If the Range Hood is to be NON-DUCTEDHorizontal Discharge Through Wall Installation PreparationWiring Connections Lamp Installing Or ReplacementFilter Installation Replacement MaintenanceService Parts DescriptionWarranty Nutone ONE Year Limited WarrantyInstrucciones Importantes DE Seguridad PlaneamientoDescarga Horizontal a Traves DE LA Pared Preparacion InstalaciónConexiones DE Cableado Instalacion Y Reemplazo DE LamparaInstalacion Y Reemplazo DE Filtro MantenimientoPiezas DE Servicio Codigo NO. Pieza DescripcionGarantia Garantia Nutone Limitada POR UN AÑO

WA6500 specifications

The NuTone WA6500 is a cutting-edge bathroom exhaust fan that combines innovative technology with elegant design, making it a standout choice for homeowners looking to enhance their bathroom's air quality and aesthetics. This model is designed specifically to eliminate humidity, odors, and pollutants, thereby ensuring a fresher and healthier environment.

One of the main features of the WA6500 is its powerful yet efficient motor. With a strong airflow rating, it can effectively vent large bathrooms quickly, reducing moisture levels that can lead to mold and mildew growth. The fan operates quietly, providing a soothing atmosphere without the disruptive noise often associated with traditional exhaust fans. This is a significant advantage for users seeking peace and tranquility while engaging in their daily routines.

The WA6500 is equipped with advanced technology, including a built-in humidity sensor that automatically activates the fan when moisture levels exceed a preset threshold. This smart feature helps to maintain a consistent level of humidity in the bathroom, ensuring that the space remains dry and comfortable.

Another notable aspect of the NuTone WA6500 is its stylish design. The fan features a sleek and modern appearance, seamlessly integrating into various bathroom decors. Available in different finishes, it allows homeowners to choose an option that best matches their aesthetic preferences.

Installation is made easier with the WA6500, as it comes with a flexible duct connection and a mounting template, allowing for a hassle-free setup process. The fan is also compatible with different ceiling types and can be retrofitted into existing installations, giving homeowners flexibility in upgrading their ventilation systems.

Energy efficiency is a priority for the WA6500, as it meets or exceeds ENERGY STAR requirements. This makes it an environmentally friendly option, reducing electricity consumption and lowering utility bills over time.

Overall, the NuTone WA6500 is an exceptional bathroom exhaust fan that not only enhances indoor air quality but also adds an element of sophistication to any space. Its combination of power, efficiency, and stylish design makes it an outstanding choice for modern bathrooms, ensuring a comfortable and fresh environment for all users.